IMBA-Q370/I3-9100E/8GB-BUNDLE

Description

ATX Motherboard supports 14nm 8th Generation LGA1151 Intel® Core™ i7/i5/i3, Celeron® and Pemtium® Processor, DDR4, Triple Independent Display, Dual GbE LAN, M.2, USB 3.0, SATA 6Gb/s, HD Audio and RoHS

● 8th generation LGA1151 Intel® Core™ i7/i5/i3, Celeron® and Pemtium® processor
● Dual-channel DDR4 2666MHz
● Support DVI-I, DP++
● Support M.2 A key for WLAN expansion
● Support Thunderbolt 3 via TB3-40GDP-R10
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specification

CPU: 8th generation LGA1151 Intel® Core™ i7/i5/i3, Pentium® or Celeron® processor
Chipset: Intel® Q370
BIOS: AMI UEFI BIOS
Memory: Four 288-pin 2666/2400 MHz dual-channel DDR4 SDRAM unbuffered DIMMs supported up to 64GB
Graphics Engine: Intel® HD Graphics Gen 9 engines with 16 low-power execution units, supports DX2015, OpenGL 5.X, OpenCL2.x, ES 2.0
Display Output: Triple independent display; 1 x HDMI (up to 4096x2304@60Hz); 1 x DP++ (up to 4096x2304@60Hz); 1 x VGA (up to 1920x1200@60Hz); 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 4096x2304@60Hz)
Ethernet: LAN1: Intel® I219LM PCIe controller with AMT 11.0 support; LAN2: Intel® I210AT PCIe controller
External I/O Interface: 1 x PS/2 KB/MS; 2 x USB 2.0; 1 x RS-232/422/485; 4 x USB 3.0
Internal I/O Interface: 1 x KB/MS (1x6 pin); 4 x RS-232 (2x5 pin, P=2.54); 1 x LPT (2x13 pin, P=2.54); 6 x USB 2.0 (2x4 pin, P=2.54); 1 x RS-232/422/485 (2x5 pin, P=2.54); 6 x SATA 6Gb/s with 5V/12V SATA power connector (RAID 0/1/5/10 supported)
TPM: 1 x TPM (2x10 pin)
SMBus: 1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Audio: Realtek ALC662 HD codec; 2 x Audio jack (line-out, mic-in) (colay 3 x Audio jack); 1 x Analog audio (2x5 pin)
Front Panel: 1 x Front panel (2x7 pin, power LED, HDD LED, speaker, power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
Expansion: 1 x M.2 A key (2230/3030); 1 x PCIe x1; 1 x M.2 M key (PCIe, USB, SATA); 1 x PCIe x8; 1 x PCIe x16 (share x16 signal with 1 x8 & 1 x4 slots); 2 x PCI; 2 x PCIe x4 (1 support TB3)
Digital I/O: 8-bit digital I/O (2x5 pin)
Fan Connector: 1 x CPU fan connector (1x4 pin); 1 x System fan connector (1x4 pin)
Chassis Open: 1 x Chassis intrusion (1x2 pin)
Power supply: ATX/AT power supply; Support AT/ATX mode; ErP/EuP compliant
Watchdog Timer: Software programmable, supports 1~255 sec. system reset
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Operating Humidity: 5% ~ 95%, non-condensing
Dimensions: 244mm x 305mm
Weight: GW:1200g / NW:700g
CE/FCC: compliant