WAFER-ULT-I1-i7-R10

Description

● 3.5” form fator with Intel® 4th generation ULT SoC supports dual-channel DDR3L DIMMs
● 12V only single voltage design with AT/ATX mode support
● 18/24-bit dual-channel LVDS support
● Support triple independent display via with LVDS, VGA and iDP
● Support PCIe Mini card slot for mSATA, 3G card, wireless card and DOM

Specification

CPU: Intel® 4th generation mobile ULT on-board SoC
Intel® Core™ i7-4650U (1.7GHz, dual-core, 4MB cache, TDP=15W)
Intel® Core™ i5-4300U (1.9GHz, dual-core, 3MB cache, TDP=15W)
Intel® Core™ i3-4010U (1.7GHz, dual-core, 3MB cache, TDP=15W)
Intel® Celeron® processor 2980U (1.6GHz, dual-core, 2MB cache, TDP=15W)
BIOS: UEFI BIOS
System Memory: Two 204-pin 1600/1333MHz dual-channel DDR3L SDRAM unbuffered DIMMs support up to 16GB
Ethernet: GbE1: Intel® I218LM PHY with Intel® AMT 9.0 support
GbE2: Intel® I210-AT PCIe controller with NCSI support
I/O Interface: 1 x 6-pin wafer for PS/2 KB/MS
1 x RS-422/485
3 x RS-232
2 x SATA 6Gb/s with 5V power connector
2 x USB 2.0 (by pin header)
2 x USB 3.0 (on rear I/O)
Digital I/O: 8-bit digital I/O (4-bit input / 4-bit output)
Super I/O: Fintek F81866
Audio: Realtek ALC662 HD Audio codec
Display Interfaces: VGA (up to 1920x1200@60Hz)
18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz)
Expansion: 1 x Full-size PCIe Mini card slot (mSATA support)
Watchdog Timer: Software programmable, support 1~255 sec. system reset
Power Supply: 12V only DC input
1 x Internal 4-pin (2x2) power connector
Support AT/ATX mode
Power Consumption: [email protected] (Intel® Core™ i5-4300U CPU, 2 x 8GB 1600 MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 7.5 supports DX11.1, OpenGL 4.2 and OpenCL1.2
Full MPEG2, VC1, AVC decode
Operating Temperature: -10°C ~ 60°C
Storage Temperature: -20°C ~ 85°C
Humidity: 5%~95%, non-condensing
Dimensions: 146mm x 102mm
Weight: GW:600g/ NW:250g
Front Panel: 1 x 6-pin (1x6) wafer for power LED & HDD LED
1 x 2-pin (1x2) wafer for power button
1 x 2-pin (1x2) wafer for power reset button
Fan Connector: 1 x 4-pin system fan connector
iRIS Remote Management Module: 1 x iRIS-1010 slot
LAN LED: 2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED