WAFER-TGL-U-I3-R11

Description

3.5" SBC with 10nm 11th Gen. Intel® Tiger Lake-UP3 Core™ i7/i5/i3 and Celeron® on-board SoC with HDMI, DP, IDPM, triple 2.5 GbE LAN , USB 3.2 Gen 2, M.2, SATA 6Gb/s, COM, IAUDIO, 0°C ~60°C and RoHS

● Support Intel® Tiger Lake-UP3 Processors
Equipped with 11th Gen. Intel® Core™ i7/i5/i3, Celeron® UP3 processor, the KINO-TGL features high performance, and can handle multitasking efficiently.
● Support Intel® I225V 2.5GbE Network Controller
Two Gigabit RJ45 network ports are provided via Intel® I225V 2.5GbE network controller to achieve up to 2.5GbE network transmission rate.
● Support USB 3.2 Gen 1 / Gen 2 up to 10Gb/s
The design of the motherboard is based on USB 3.2 protocol. Four USB 3.2 Gen 2 (10Gb/s) are provided through external I/O for efficient data transfer rate. The WAFER-TGL also supports two internal USB 2.0 ports for additional wiring options.
● IEI-specific IDPM Interface
IEI uniquely designs a IDPM interface that can connect to display modules, enabling users to add LVDS/eDP/VGA display interface upon requirements

Specification

SOC: 11th Gen. Intel® mobile Tiger Lake-UP3 SoC; Intel® Core™ i7-1185G7E (up to 4.8GHz, quad-core, 12M Cache, TDP=28/15/12W); Intel® Core™ i5-1145G7E (up to 4.4GHz, quad-core, 8M Cache, TDP=28/15/12W); Intel® Core™ i3-1115G4E (up to 4.1GHz, quad-core, 6M Cache, TDP=28/15/12W); Intel® Celeron® 6305 (up to 1.8GHz, dual-core, 4M Cache, TDP=15W)
BIOS: AMI UEFI BIOS
Memory: 1 x 260-pin 3200 MHz DDR4 SO-DIMMs support up to 32 GB
Graphics Engine: Intel® Gen11 UHD Graphics
Display Output: Four Independent Displays; 2 x HDMI 1.4 (up to 4096 x 2160@30Hz); 1 x DP 1.4 (up to 4096 x 2160 @60Hz); 1 x IEI IDPM 3040 slot (only for IEI eDP/LVDS/VGA module)
Ethernet: LAN1: Intel® I225V 2.5GbE; LAN2: Intel® I225V 2.5GbE; LAN3: Intel® I225V 2.5GbE
External I/O: 4 x USB 3.2 Gen 2 (10Gb/s)
Internal I/O: 1 x SATA 6Gb/s; 2 x USB 2.0 pin header (P=2.0); 2 x RS-232/422/485 (2x5 pin, P=2.0); 1 x RS-232 (2x5 pin, P=2.0)
I²C: 1 x I²C (1x4 pin)
Audio: 1 x IAUDIO (2x5 pin) supporting IEI AC-KIT-888S kit
Front Panel: 1 x Power LED & HDD LED (1x6 pin P=2.0); 1 x Power button (1x2 pin P=2.0); 1 x Reset button (1x2 pin P=2.0)
LAN LED: 3 x LAN LED (1x2 pin)
Expansion: 1 x M.2 A key for Wi-Fi & BT (2230) (PCIe Gen3 x1/USB 2.0 signal); 1 x M.2 B key (3052/2042) w/ SIM holder (PCIe Gen3 x2/USB 2.0 signal)
Digital I/O: 1 x 12-bit digital I/O (2x7pin)
TPM: Intel® PTT (TPM 2.0)
Fan Connector: 1 x System fan connector (1x4 pin)
Power Supply: +12V DC input power (AT/ATX mode)
Watchdog Timer: Software Programmable support 1~255 sec. System reset
Power Consumption: TBD
Operating Temperature: 0°C ~ 60°C
Storage Temperature: -20°C ~ 70°C
Operating Humidity: 5% ~95%, non-condensing
Dimension: 146mm x 102mm
Weight: GW: 850g / NW: 350g
Certification: CE/FCC Compliant