NSM-208PSE-4 CR

PoE Switch 8x10/100TX/Metal

Article status

Standard since 22-Oct-2010

Delivery time

on request

Please log in to view prices

Datasheet Manual

Description

NS-208PSE/NSM-208PSE - 8-port Industrial 10/100 Mbps Ethernet with 8-PoE (PSE) Switch
NS-208PSE-4/NSM-208PSE-4 - 8-port Industrial 10/100 Mbps Ethernet with 4-PoE (PSE) Switch

The NS-208PSE/NS-208PSE-4 is an 8-port unmanaged PoE (Power over Ethernet) Industrial Ethernet switch, it supports 8/4 PoE ports which are classified as power source equipments (PSE). The NS-208PSE/NS-208PSE-4 makes centralized power supply come true and provides up to 15.4 W of power per port. The NS-208PSE/NS-208PSE-4 can be used to power IEEE802.3af compliant powered devices (PD) by Ethernet cable and eliminates the need for additional power wiring.
The NS-208PSE/NSM-208PSE is exactly the same as the NS-208PSE-4/NSM-208PSE-4, except for the PoE ports.

● Each port supports both 10/100 Mbps speed auto negotiation
● Full duplex IEEE 802.3x and half duplex backpressure flow control
● Auto-detection of PD (powered devices) and automatic power management
● Over-temperature, over-current and over/under-voltage detection
● Supports operating temperatures from -40 °C ~ +75 °C
● Automatic MDI/MDI-X crossover for plug-and-play
● Store-and-forward architecture
● 8 PoE ports for NS-208PSE/NSM-208PSE;
● 4 PoE ports for NS-208PSE-4/NSM-208PSE-4
● Supports +46 ~ +55 VDC power input
● DIN-Rail Mounting

Specification

Technology
Standards: IEEE 802.3, 802.3u, 802.3x ,802.3af (Power over Ethernet)
Processing Type: Store & forward; wire speed switching
MAC Addresses: 1024
Memory Bandwidth: 3.2 Gbps
Frame Buffer Memory: 512 Kbit
Flow Control: IEEE 802.3x flow control, back pressure flow control
Interface
RJ-45 Ports: 10/100 Base-T(X) auto negotiation speed, F/H duplex mode, and auto MDI/MDI-X connection
LED Indicators: Power, Link/Act, Power Device is detected
Ethernet Isolation: 1500 Vrms 1 minute
EMS Protection: Yes
Power Input
Input Voltage Range: +46 ~ +55 VDC for PoE output
Power Consumption: 0.09 A @ 48 VDC without PD loading; 1.45 A @ 48 VDC with PD full loading
Protection: Power reverse polarity protection
EMS Protection: Yes
Connection: 3-Pin Removable Terminal Block
PoE Technology
PoE Compliance: 100% IEEE 802.3af compliant
PoE Classification: PSE (Power Sourcing Equipment)
PoE Voltage: +46 ~ +55 VDC depending on power input
PoE Power: Up to 15.4 watts per channel
PoE Operation: Automatic detection and power management
PoE Pin Assignments: V+ (Pin 1, 2), V- (Pin 3, 6)
PoE Disconnect Mode: DC disconnect
Mechanical
Casing: Metal (IP30 Protection)
Dimensions (W x L x H): 25 mm x 168 mm x 119 mm
Installation: DIN-Rail Mounting
Environment
Operating Temperature: -40 °C ~ +75 °C
Storage Temperature: -40 °C ~ +85 °C
Ambient Relative Humidity: 10% ~ 90% RH, non-condensing