Deutsch
English
Description
Industrial 4-port secure serial to Ethernet device server with 4xRS-232/422/485 and 2x10/100Base-T(X), 1-port PoE P.D.
IDS-5042 series is an innovative secure 4-port RS-232/422/485 to 2 ports LAN secure device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5042 series can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5042 series features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission.
IDS-5042 series supports RS-232/422/485 and provides dual redundant power inputs 12~48 VDC on terminal block to guarantee a non-stop operation. Further, IDS-5042+ features PoE P.D. (Power Device) function with 1kv isolation on the PoE port. With wide operating temperature, -10~70°C, and rugged IP- 30 housing design, IDS-5042 series could operate in the harsh industrial environment. Therefore, IDS-5042 series is the best solution to the high demand of secure serial to Ethernet critical data communication.
• Operating Modes : Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP
• Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode; 4 IP ranges : UDP
• NAT Pass-Through : the user can manage IDS-5012 through NAT router
• Security : SSL data encryption ; secured management by HTTPS and SSHIP Access; IP White List
• Internet Communication : PPPoE authentication
• Update DNS Hostname : DDNS
• Dual redundant Ethernet port support redundant mode(Recovery time < 10ms)
• Ethernet switch mode enable Daisy Chain
• Event Warning by Syslog, Email, SNMP trap, and Beeper
• Configurable by Web-based and Windows utility (DS-Tool)
• 1KV isolation for PoE P.D. port of IDS-5042+
• Various Windows O.S. supported : Windows NT/2000/ XP/ 2003/VISTA(32/64bit)/Windows 7(32/64bit)
Specification
- Physical Ports
- 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 2
- PoE Feature
- PoE P.D. Present at ETH2 Power Device (IEEE 802.3af):
- IEEE 802.3af compliant input interface
- Power consumption: 8Watts max.
- Over load and short circuit protection
- Isolation Voltage: 1000 VDC min.
- Isolation Resistance : 108 ohms min
- Serial Ports
- Connector
- DB9(male) x 4
- Operation Mode
- RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool
- Serial Baud Rate
- 110 bps to 460.8 Kbps
- Data Bits
- 5, 6, 7, 8
- Parity
- odd, even, none, mark, space
- Stop Bits
- 1, 1.5, 2
- RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- RS-422
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (4-wire)
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (2-wire)
- Data+, Data-,GND
- Flow Control
- XON/XOFF, RTS/CTS, DTR/DSR
- Network Features
- Network Protocols
- ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
- LED Indicators
- Power Indicator
- PWR 1(2) / Ready :
- Red On : Power is on and booting up
- Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
- Green On : Power is on and functioning Normally
- Green Blinking : Located by Administrator
- 10/100Base-T(X) RJ45 Port Indicator
- Green for port Link/Act at 100Mbps.
- Amber for port Link/Act at 10Mbps.
- Serial TX / RX LEDs
- Red : Serial port is receiving data
- Green : Serial port is transmitting data
- Fault Indicator
- Red : Indicate unexpected events occurred
- Fault Contact
- Relay
- Relay output to carry capacity of 1A at 24VDC
- Power
- Redundant Input Power
- Triple DC inputs, 48VDC from PoE and Dual 12~48VDC on 6-pin terminal block
- Power Consumption (Typ.)
- 5.5 watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
- Weight (g)
- 682 g
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 52(W) x 106.1(D) x 144.3(H) mm (2.05x4.18x5.68 inch.)
- Weight (g)
- 682 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -10 to 70°C (14 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A,
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
- 569,972
- Warranty
- 5 years
Filter criteria
- Customs Tariff Number
- 84733020
- POE
- P.D.
- Status
- Phased out
- Manufacturer
- ORING