I-7045-CR

Description

16-channel Isolated Digital output Module

All modules in the 7045 series offer 16 digital output channels, each of which features Photocouple isolation. The I-7045(D)/M-7045(D) supports sourcetype output, while the I-7045(D)-NPN/M-7045(D)-NPN supports sink-type, and both are equipped with short circuit protection. There are options to enable both power-on and safe values, and 16 LED indicators that can be used to monitor the status of the digital output channels. 4 kV ESD protection, 4 kV EFT protection, 3 kV surge protection for power input and 3750 VDC Intra-module isolation are standard. The M-7045(D)/ M-7075(D)-NPN has the same hardware specifications as the I-7045(D)/I-7045(D)-NPN, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.

● I-7045(D)/M-7045(D)
● Source-type Digital Output Channels with Overload Protection
● I-7045(D)-NPN/M-7045(D)-NPN
● Sink-type Digital Output Channels with Overload Protection
● Confi gurable Power-on Value Settings
● Confi gurable Safe Value Settings
● Short Circuit Protection
● Overload and Overvoltage Protection
● 3750 VDC Intra-module Isolation
● 4 kV ESD and EFT Protection
● 3 kV Surge Protection for Power Input
● Dual Watchdog
● Wide Operating Temperature Range: -25 to +75°C

Specification

Models: I-7045; M-7045
Digital Output
Channels: 16
Type: Open Source
Sink/Source (NPN/PNP): Source
Load Voltage: +10 ~ 40 VDC
Max. Load Current: 650 mA/Channel
Overvoltage Protection: 47 VDC
Overload Protection: 1.4 A (with Short-circuit Protection)
Power-on Value: Yes
Safe Value: Yes
Models: I-7045; M-7045
Communication
Interface: RS-485
RS-485 Bias Resistor: No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format: N, 8, 1
Baud Rate: 1200 ~ 115200 bps
Protocol: DCON (for I-7045 series); Modbus RTU, DCON (for M-7045 series)
Dual Watchdog: Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator: Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator: -
7-Segment LED Display: -
Isolation
Intra-Module Isolation, Field-to-Logic: 3750 VDC
EMS Protection
ESD (IEC 61000-4-2): ±4 kV Contact for each Terminal; ±8 kV Air for Random Point
EFT (IEC 61000-4-4): ±4 kV for the 16 DO channels and Power,; ±2 kV for the RS-485 Port
Surge (IEC 61000-4-5): ±3 kV for Power Line
Power
Reverse Polarity Protection: Yes
Input Range: 10 ~ 30 VDC
Consumption: 0.6 W
Dimensions (W x L x H): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall Mounting
Environment
Operating Temperature: -25 ~ +75°C
Storage Temperature: -40 ~ +85°C
Humidity: 10 ~ 95% RH, Non-condensing