Deutsch
English
Description
1-channel RTD Input Module
I-7013 is used for measuring temperature by RTD and provide PT100, Ni120, PT1000 types. It supports 2/3/4 wire RTD and features open wire detection. Besides, I-7013 also has qualifi cation for 3000 VDC intra-module isolation and supports lead resistance elimination for 3/4-wire connection.
● RTD Input
● Lead Resistance Elimination for 3/4-wire Connection
● Open Wire Detection
● 4 kV ESD Protection
● 3000 VDC Intra-Module Isolation
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
Specification
- Models
- I-7013D
- RTD Input Module
- Channels
- 1
- Wiring
- 2/3/4-wire
- Sensor Type
- Pt100, Pt1000, Ni120
- Resolution
- 16-bit
- Accuracy
- ±0.05%
- Sampling Rate
- 10 Hz
- Individual Channel Configuration
- No
- Overvoltage Protection
- ±5 VDC
- Open Wire Detection
- Yes
- 3-wire RTD Lead Resistance Elimination
- Yes
- Resistance Measurement
- 3.2 kΩ Max.
- Digital Input
- Channels
- -
- Sink/Source (NPN/PNP)
- ON Voltage Level
- OFF Voltage Level
- Counter(50 Hz, 16-bit)
- Overvoltage Protectio
- Digital Output
- Channels
- -
- Type
- Sink/Source (NPN/PNP)
- Load Voltage
- Max. Load Current
- Overvoltage Protection
- Overload Protection
- Power-on Value
- Safe Value
- Models
- I-7013D
- Communication
- Interface
- RS-485
- Bias Resistor
- No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
- Format
- (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
- Baud Rate
- 1200 to 115200 bps
- Protocol
- DCON
- Dual Watchdog
- Yes, Module (1.6 Seconds), Communication (Programmable)
- LED Indicator/Display
- System LED Indicator
- Yes, 1 as Power/Communication Indicator
- I/O LED Indicator
- -
- 7-Segment LED Display
- Yes
- Isolation
- Intra-Module Isolation, Field-to-Logic
- 3000 VDC
- EMS Protection
- ESD (IEC 61000-4-2)
- ±2 kV Contact for each Terminal
- EFT (IEC 61000-4-4)
- ±4 kV to Power Line
- Surge (IEC 61000-4-5)
- ±0.5 kV for Power Line
- Power
- Reverse Polarity Protection
- Yes
- Input Range
- +10 ~ +30 VDC
- Consumption
- 1.3 W
- Mechanical
- Dimensions (L x W x H)
- 123 mm x 72 mm x 35 mm
- Installation
- DIN-Rail or Wall Mounting
- Environment
- Operating Temperature
- -25 to +75°C
- Storage Temperature
- -40 to +85°C
- Humidity
- 10 to 95% RH, Non-condensing
Filter criteria
- Customs Tariff Number
- 85176200
- Input protocol
- DCON
- Analog In
- 01
- Host Interface
- Serial
- Status
- Standard
- Manufacturer
- ICPDAS