News

Reduced cabling effort.

When installing Panel PC systems, the cabling is often complex. If power and data lines are laid separately, more time must be spent on installation. The use of PoE devices can reduce the time required and consequently save on personnel costs.

For this purpose, ICP Germany offers the PoE-capable 7" panel AFL3-W07A-AL. The built-in display offers a 16:9 picture format with a resolution of 1024x600 pixels. The brightness is 500 cd/m² with a contrast ratio of 700:1. The Panel PC is equipped with a 10 point PCAP touch, which provides UV protection and an anti-glare coating. Inside, a Dual-Core Intel® Celeron® N3350 operates with a maximum turbo frequency of 2.4GHz. The main memory can be upgraded up to 8Gb DDR3L with a clock frequency of 1867 MHz. The AFL3-W07A-AL offers a M.2 2242 B+M key for solid state storage media as well as two Gigabit Ethernet interfaces...

Outdoor LoRaWAN Gateway for the Internet of Things.

The new UG87 from ICP Deutschland features IP67 all-round protection and up to 16 simultaneous channels. This enables the gateway to be used outdoors and to receive data from Class A and Class C devices within a range of max. 10 km and to pass it on to data centres.

Inside, a 64-bit ARM Cortex-A53 operates with 800 MHz clock rate. The UG87 is equipped with 512MB DDR RAM and 8 GB eMMC memory and has an M.2 slot to expand the memory with SATA based SSDs. The network port supports 10/100/1000 Base-T and is PoE capable. As a powered device, the UG87 consumes a maximum of 8.2 watts. If no PoE voltage is available...

Thin-Mini ITX Board with Apollo Lake BGA Processors.

With the PD10AI, ICP Deutschland launches a Thin Mini ITX Board that supports system integrators in two ways. The first is the low height of the board, which is required for particularly compact systems. On the other hand by the design of the board, which allows the certification according to EMV/FCC class B.

The PD10AI is equipped as standard with the Intel® Celeron® N3350 Dual Core processor, which supports a burst frequency of 2.4GHz. Optionally, a version with Quad Core Intel® Pentium® N4200 with 2.5GHz burst frequency is available. Both versions support up to 8GB DDR3L SO-DIMM memory with a maximum clock rate of 1867MHz. The internal Intel® HD graphics unit provides triple display support. A 4K HDMI with max. 3840x2160 resolution, a 4K display port with max. 4096x2160 resolution and a Full HD LVDS connector with max. 1920x1200 resolution are available. The LVDS connector can optionally be replaced by a 4K embedded display port with max. 3840x2160 resolution.

The PD10 AI is equipped...

LoRaWAN Gateway for the Internet of Things.

With the UG85, ICP Germany launches an intelligent and compact indoor LoRaWAN gateway that can be expanded in many ways.

The UG85 is offered with a 64-bit ARM Cortex A-53 with 800 MHz, 512MB DDR3 RAM and 8Gb eMMC flash memory. Eight LoRa channels based on the Semtech SX1301 chipset are available, which can be delivered in the frequency band for the respective target country. The UG85 supports version V1.0 Class A and C as well as V1.0.2 Class A and C and has a maximum range of 10km. A 10/100/1000 Base-T network connector, a serial RS-232 connector, a digital input and an output are available as standard.

The gateway functionality can optionally be extended by 3G/4G mobile radio with dual SIM slot and IEEE802.11 b/g/n/ac WiFi. GPS with an accuracy of less than 2.5 meters is also available as an optional extension. The UG85 supports a variety of network protocols, VPN tunnels, access authentication, firewall functionalities and management...

Modular Embedded PC with Apollo Lake Power and PoE functionality.

The new MB1-10AP Embedded PC is the basic model of the new modular M-Series, particularly compact in a 1.5 litre housing and modular due to its intelligently thought-out expansion solution.

The MB1-10AP is available in four versions, two with Power over Ethernet functionality and two with normal network interfaces. Two processor types are available, the Intel Pentium N4200 four-core processor with maximum 2.5GHz and the Celeron N3350 two-core processor with maximum 2.4GHz. All variants support up to 8GB DDR3L SO-DIMM memory with a frequency of 1867 MHz.

The standard versions include HDMI, two Intel i210-IT and one Realtek...

Industrial embedded system with AMD E9175 graphic extension.

The industrial embedded system TANK-870E9175 from ICP Germany offers a balanced performance per watt performance with its AMD Radeon E9175 extension. The AMD graphics unit offers five mini display port connections with a maximum power consumption of 35 watts. Five independent displays can be operated simultaneously with 4K resolution.

The TANK-870E9175 is offered in two variants with Intel® Skylake CoreTM i7 or i5 processor and supports a maximum of 64GB RAM on two DDR4 SO-DIMM banks.

The embedded system offers four USB 3.0, four USB 2.0, four RS-232 with overvoltage protection up to 2.5KV, two RS-232/422/485 each, two GbE LAN as well as an 8-bit digital I/O interface. In addition, the TANK-870E9175 offers expansion options via PCI as well as half-size and full-size Mini PCIe slots. The two internal 2.5" SATA 6Gb/s mounting frames and the RAID...

Thin-Mini ITX Board with Coffee-Lake Octa/Hexa-Core Processor Support.

Main feature of the new Thin-Mini-ITX Board PH14FEI from ICP Germany is the support of Intel® 9th and 8th Core I^TM processors. The PH14FEI board with 5-phase power design was designed to support processors with up to 95 watts or a maximum IA core current of 138 amps. Thus, the 8th generation Hexa-Core I^TM with 95 Watt TDP or the 9th generation Octa-Core I^TM with 35 Watt TDP can be operated on the board.

The PH14FEI is available in two versions, a low-cost version with Intel® H310 chipset and...

Created for extremes: Modular Embedded PC with XEON Power and 10x PoE.

With the MX1-10FEP, ICP Deutschland launches the first embedded PC of the new modular M series. The MX1 is designed to withstand extremes and has high computing power, flexible expansion options for hardware and applications in extreme environments. With the 1151 processor socket and the Intel® C246 chipset used, the MX1 supports XEON and Core I processors from Intel 8th generation. This generation brings a performance increase of up to 36% for XEON and up to 15% for Core I processors compared to the previous generation. Both 35 Watt CPU variants and CPUs with up to 80 Watt are supported. Up to 32GB ECC or non-ECC DDR4 2666 MHz RAM can be installed depending on the processor variant.

The Intel HD graphics provides an HDMI, a display port and a DVI-I output. In the case with a volume of just 7.8 litres, three 2.5" installation frames, one of which is designed as a removable medium, two Mini PCIe slots with mSATA support, an M.2 2242/2260/2280 slot with PCIe...

PoE Upgrade for the AFOLUX GEN III series.

The proven AFOLUX GEN III series from ICP Germany now has a PoE upgrade option with the new edition. Via an optional PoE module, PoE functionality is added to a GbE LAN interface and the AFL3 becomes a Powered Device. In this way, the 10.1" to 15.6" panel PCs can be operated without an additional power supply and process data simultaneously. Power over Ethernet according to IEEE802.3at or bt standard is supported. This requires that the feeding network provides up to 30W or 60W to supply the AFL3-AL with sufficient power.

The AFL3-AL series is equipped with capacitive touch (PCT) as well as anti-glare...

Versatile industrial 4G LTE cellular router

With the UR55, ICP Deutschland is launching an industrial LTE cellular router onto the market that offers a wide range of interfaces. Inside the router works an ARM Cortex A7 with 528MHz clock rate, pre-installed 128MB DDR3 RAM and 128MB flash memory. Five RJ45 10/100 Base-T interfaces are available as network interfaces, which can be configured in a combination of 1x WAN and 4x LAN or 2x WAN and 3x LAN. IPsec, OpenVPN, GRE, L2TP, PPTP, DMVPN, SNMP, TCP, UDP, RIP are just a few of the supported network protocols and frameworks. At serial...