Deutsch
English
News
Small embedded PC with AI computing power.
With the ultra compact ITG-100AI, ICP Germany offers an inference system that is prepared for use with dedicated neural network topologies (DNN).
On the hardware side, the two Intel® Movidius™ Myriad™ X VPU in the ITG-100AI offer excellent inference performance per watt, 16 SHAVES cores for AI calculations and native FP16 support. On the software side, the ITG-100AI supports Intel®'s open source toolkit "Open Visual Inference Neural Network Optimization" (OpenVINO™), providing end-to-end acceleration...
Modular Embedded PC with XEON power and PCIe Dual GPU Slot.
The second embedded PC from the MX1 series from ICP Germany was created for extremes. High computing power, flexible expansion options through PCI Express, M.2, Mini-PCIe slots and expansion modules for use in extreme environments.
With the 1151 processor socket and the Intel® C246 chipset, the MX1-10FEP-D supports both the 8th and 9th generation XEON and Core I processors from Intel: both 35 Watt CPU variants and CPUs with up to 80 Watt. Up to 32GB ECC or non-ECC DDR4 2666 MHz memory can be installed depending on the processor variant. The Intel HD graphics provides an HDMI, a display port and a DVI-I output. Three 2.5" installation frames, one of which is designed as a removable medium, two Mini-PCIe slots with mSATA support, one M.2 2242/2260/2280 slot with PCIe x4 signal, one M.2 2230, one PCI Express x16 and one x1 interface can be accommodated in the 8.5 liter case. Both the PCIe x16 slot and the case have been designed for the operation of graphics cards. This makes the MX1 perfectly suited for AI applications that use graphics performance for calculation.
The MX1 also offers connection options for remote power ON/OFF and remote reset. This allows the MX1 to be placed and operated...
More performance with mature Whiskey Lake processors.
The WAFER-ULT5 is the second Whiskey Lake Embedded Board that ICP Germany is launching on the market.
The WAFER-ULT5 is a 3.5" mainboard which is equipped with a cooling tray. The cooling tray allows a very easy installation of the board and an uncomplicated heat dissipation of the installed components, which is an advantage for vending machine manufacturers or machine builders.
Like the recently introduced NANO-ULT5 Epic Board...
Always and everywhere signal reception.
With the SIM cards from wherever SIM GmbH, ICP Deutschland offers the perfect SIM for the LTE mobile router series UR3x, UR5x and UR7x. By using the SIM solution from the Hamburg-based company in ICP's router series, customers benefit from numerous advantages:
Thanks to the cards, the routers can dial into more than 480 mobile phone networks worldwide - automatically always into the strongest network at the respective location. This minimizes the risk of connection failures. In addition, the ICP routers can move within a country and across national borders at no extra cost thanks to unlimited national and international roaming...
Small compact Panel PC with True-Flat PCAP Touch.
The P100-10AS is the first Panel PC from the P series, which is being launched by ICP Germany. The P100 offers a 10.1" TFT-LC display with a WXGA (1280x800) resolution and 16.7 million colors at a color depth of 8 bit. The display delivers a brightness of 400 cd/m2 and a viewing angle stability of 170°/170°. The front offers IP65 protection and the airbonded 10-point True-Flat Projected Capacitve Touch Screen provides a crystal clear image. Nevertheless, the simple airbonding process keeps the costs low, but increases the quality of the displayed image enormously.
The cornerstone of the P100 is the PD10-AS 3.5" motherboard, which is equipped with a dual core Intel® Apollo Lake-M CeleronTM N3350 with a maximum turbo frequency of 2.4 GHz. Optionally, other processors such as the quad-core PentiumTM N4200 with a maximum of 2.5GHz are also available. In terms of memory, the P100 can be equipped with a maximum of...
LoRAWAN Starter Kit with Cloud Access.
A kit usually simplifies a proof of concept, as the time-consuming assembly of individual components is no longer necessary. Three Agriculture LoRaWAN Kits based on the compact UG85 LoRaWAN Gateway now extend the portfolio of ICP Germany. They differ primarily in the power supply of the sensor node.
There is a version available where the sensor node is supplied by battery, a version where the sensor node can be supplied by battery as well as DC voltage and a version which is delivered with a suitable solar panel for the sensor node. Common to all three kits is the sensor equipment and the gateway.
The kits contain the intelligent and compact UG85, an indoor LoRaWAN gateway equipped with a 64-bit ARM Cortex A-53 with 800 MHz, 512MB DDR3 RAM and 8Gb eMMC Flash memory. Eight LoRa channels based on the Semtech SX1301 chipset are inherent to the UG85, which can be delivered in the frequency band for the respective target country....
Compact and inexpensive mobile router for IoT applications.
Three characteristics distinguish the UR32 mobile router series from ICP Germany. One is the housing format, which makes the router particularly compact. Secondly, the equipment variants, which make the router both inexpensive and versatile.
The compact IP30 protected metal housing is 108 mm long, 90 mm wide and just 26 mm high. Built into the housing is the main board, on which the router's many functions are provided. The core is an ARM Cortex A7 with 528MHz clock speed, pre-installed 128MB DDR3 RAM and 128MB Flash memory for the router operating system. Two 10/100 Base-T network interfaces are available for communication with peripheral devices, which can be configured in a combination of 1x WAN and 1x LAN or 2x LAN. The LTE/3G/2G mobile radio modem features secure data transmission. The LTE/3G/2G mobile radio modem establishes a simple connection between several...
As a precautionary measure to stem the spread of the corona virus, all factories in China are currently closed.
According to current information, we will receive deliveries from our Asian partner companies again from February 10, 2020 onwards.
Since in some regions of China, where suppliers are active, the production ban has been extended until February 22, 2020, it cannot be ruled out, however, that there will be further delays in delivery.
Our customers whose deliveries are affected by delays have been informed about the situation.
We will continue to keep you up to date with the latest developments and inform you immediately of any changes.
Stock goods from Germany can of course be shipped as usual without delays.
Your ICP team
2 TOPS KI Power for retrofitting.
ICP Germany completes its portfolio of AI accelerator cards with the Mustang-M2BM-MX2 card. In addition to Mini PCIe and PCIe based solutions, an M.2 PCIe plug-in card variant is now available. With the M.2 format in the size 22x80 mm, system integrators are able to build small embedded PC systems with AI functionality as deep learning inference systems.
Two Intel® Movidius™ Myriad™ X MA2485 Vision Processing Units (VPUs) provide AI functionality through 16 SHAVES cores each. Each Myriad™ VPU delivers up to one trillion calculations per second. With a maximum power of 8 watts, the Mustang-M2BM-MX2 is particularly suitable for low-power AI applications. Additionally, the multi-channel capability allows each VPU to be assigned a different DL topology. This allows simultaneous calculations to be performed, and at the same time, for example, object recognition and face recognition can be performed. Compatibility with the Open Visual Inference Neural Network Optimization (OpenVINOTM) Toolkit from Intel®, ensures a simple and...
Mini ITX Board for Intel® CoreTM processors of the 9th and 8th generation.
The classically designed Mini-ITX board PH13FEI from ICP Germany impresses with its support of the 9th and 8th CoreTM processors from Intel®. Standardly equipped with a 24-pin ATX voltage connector, it supports six-core processors with up to 95 watts and eight-core processors with up to 35 watts. In other words, all Hexa-Core and Octa-Core of the 8th and 9th generation can be operated with a maximum IA Core current of 138 Ampere on the board.
ICP Germany offers two variants, a low-cost variant with Intel® H310 chipset and a functionally fully equipped variant with Q370 chipset. Two vertically arranged SO-DIMM DDR4 memory banks allow an upgrade to a maximum of 32GB non-ECC memory in dual channel operation. The PH13FEI supports triple displays and offers a HDMI version 1.4, two display ports version 1.2, a LVDS or an embedded display port. The maximum resolution of the three display ports is up to 4096x2304 at 60Hz and up to 4096x2160 at 30 Hz for HDMI. For LVDS at 60Hz a maximum resolution of 1920x1200 is available.
For the connection of USB components, the Q370 variant offers...