KINO-DQM871-i1-i3E-R10

Mini-ITX Board/i3-4102E/HDMI/LVDS

Article status

Phased out since 30-Jun-2018

Delivery time

on request

Please log in to view prices

Datasheet Manual Product Change Notice End of Life Notice

Description

Mini-ITX SBC supports Intel® 22nm 4th generation mobile Core™ i7/i5/i3 and Celeron® on-board processors, HDMI/VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, SATA 6Gb/s, HD Audio

● 4th generation Intel® mobile Core™ i7/i5/i3 or Celeron® on-board processor
● DDR3 1066/1333/1600MHz dual-channel SDRAM
● HDMI 1.4a compliant, triple independent display supported
● 3D micro-architecture enhancements support DX11.1, OCL 1.2 and OGL3.2
● Rich media acceleration for hardware decode and encode acceleration
● Intel® GbE LAN with Intel® AMT 9.0 support
● High speed I/O interface for PCIe Gen 3.0 add-on card, USB 3.0 and SATA 6Gb/s supported
● Supports dual PCIe Mini expansion for PCIe Mini device and mSATA
● IEI Jumper-less function
● Support IPMI 2.0 with iRIS-1010 module

Specification

CPU: Intel® mobile Core™ i7-4700EQ on-board processor with Intel® AMT 9.0 support (2.4GHz, quadcore,6MB cache, TDP=47W)
Intel® mobile Core™ i5-4402E on-board processor with Intel® AMT 9.0 support (1.6GHz, dual-core,3MB cache, TDP=25W)
Intel® mobile Core™ i3-4102E on-board processor (1.6GHz, dual-core, 3MB cache, TDP=25W)
Intel® mobile Celeron® 2002E on-board processor (1.5GHz, dual-core, 2MB cache, TDP=25W)
Intel® mobile Core™ i5-4400E on-board processor with Intel® AMT 9.0 support (2.7GHz, dual-core,3MB cache, TDP=37W) (by request)
Intel® mobile Core™ i3-4100E on-board processor (2.4GHz, dual-core, 3MB cache, TDP=37W)(by request)
Intel® mobile Celeron® 2000E on-board processor (2.2GHz, dual-core, 2MB cache, TDP=37W)(by request)
PCH: Intel® QM87
BIOS: UEFI BIOS
System Memory: Two 204-pin 1066/1333/1600 MHz DDR3 dual-channel SO-DIMMs (Support up to 16GB)
Ethernet: GBE1: Intel® I217LM with Intel® AMT 9.0 support
GBE2: Intel® I211-AT PCIe controller
I/O Interface: 5 x RS-232
4 x USB 3.0 (2 on rear I/O, 2 by pin header)
1 x RS-422/485
10 x USB 2.0 (2 on rear I/O, 8 by pin header)
1 x 6-pin header for KB/MS
2 x SATA power connector (4P, P=2.54)
2 x SATA 3GB/s
2 x SATA 6Gb/s (RAID 0, 1, 5, 10 supported)
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: Fintek F81866
TPM: 2 x 10-pin pinheder
SMBus: 1 x 4-pin wafer
Audio: Realtek ALC662 HD Audio codec
Display Interfaces: VGA (up to 1920x1200@60Hz)
18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz)
Dual HDMI (up to 2500x1600@60Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz)
Expansion: 1 x Full-size PCIe Mini card slot (supports mSATA, SATA 6GB/s signal only)
1 x PCIe x16 (Gen.3)
1 x iRIS-1010 slot (iRIS Remote Management Module)
Watchdog Timer: Software programmable, support 1~255 sec. system reset
Power Supply: 12V DC input
1 x External DC jack (4-pin DIN)
1 x Internal 4-pin (2x2) power connector
Support AT/ATX mode
Fan: 1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
Power Consumption: 12V@6.03A (Intel® Core™ i7-4770EQ, 2.4GHz CPU with 8GB (2x4GB) 1333MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 7.5 supports DX11.1 and OpenCL 1.2, OpenGL 3.2 Full MPEG2, VC1, AVC Decode
Operating Temperature: -20°C ~ 60°C
Humidity: 5% ~ 95%, non-condensing
Dimensions: 170mm x 170mm
Weight: GW: 900g/NW: 450g
Front Panel: 1 x Front panel (Power LED, HDD LED, Speaker, Power Button, Reset Button)
Fan Connector: 1 x 4-pin CPU fan connector/ 1 x 4-pin system fan connector
LAN LED: 2 x 2-pin headers for LAN1 Link LED, LAN2 Link LED