KINO-DH810-R10

Description

Mini-ITX SBC with LGA1150 Intel® 4th generation Core™ i7/i5/i3, Pentium® or Celeron® CPU, DDR3, DVI-D, VGA, iDP, Dual Intel® PCIe GbE, USB 3.0, SATA 6Gb/s, HD Audio and RoHS

● LGA1150 Intel® 4th generation Core™ i7/i5/i3, Pentium® or Celeron® processor supported
● DDR3 1066/1333/1600 MHz dual-channel SDRAM
● 3D micro-architecture enhancement supports DX11.1, OCL 1.2 and OGL3.2
● Rich media acceleration for hardware decode and encode acceleration
● High-speed I/O interface for USB 3.0, SATA 6Gb/s and mSATA
● IEI Jumper-less function

Specification

CPU: LGA1150 Intel® 4th generation Core™ i7/i5/i3/Pentium®/Celeron® processor supported
System Chipset: Intel® H81
BIOS: UEFI BIOS
System Memory: Two 240-pin 1066/1333/1600 MHz dual-channel DDR3 SRAM Unbuffered SO-DIMM supported (system max. 16GB)
Ethernet: Dual GbE: Intel® I211-AT PCIe controller
I/O Interface: 1 x RS-422/485
1 x 6-pin wafer for PS/2 KB/MS
5 x RS-232
2 x SATA 6GB/s
2 x USB 3.0 (2x Rear I/O)
6 x USB2.0 (2x Rear I/O, 4x pin header)
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: Fintek F81866
TPM: 2 x 10-pin pinheder
SMBus: 1 x 4-pin wafer
Audio: Realtek ALC662 HD codec
Display Interfaces: VGA (up to 1920x1200 @ 60 Hz)
DVI-D (up to 2560x1600 @ 60 Hz)
iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 3840x2160 @60 Hz)
Expansion: 1 x PCIe x1 slot
1 x full size mini PCIe card slot (support mSATA)
Watchdog Timer: Software Programmable support 1~255 sec. system reset
Power Supply: 12V only DC input
1 x external DIN 4pin DC jack
1 x internal 2x2-pin power connector
Support AT/ATX mode
Fan: 1 x 4-pin CPU fan connector
1 x 4-pin system fan connector
Power Consumption: +12V@ 6.03A
(Intel® Core™ i7-4770K 3.90 GHz CPU with two 1333MHz 4GB DDR3 memory)
Graphic: Support for DX11.1 and OpenGL3.2
Full MPEG2, VC1, AVC Decode
Operating Temperature: -20°C ~ 60°C
Humidity: 5% ~ 95%, non-condensing
Dimensions: 170mm x 170mm
Weight: 900g/NW: 450g
Front Panel: 1 x Front Panel (Power LED, HDD LED, Speaker, Power Button, Reset Button)
LAN LED: 2 x 2 Pin for LAN1 Link LED, LAN2 Link LED