IMBA-R680-R10

Description

ATX motherboard supports LGA1700 12th/13th Generation Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processor, DDR5, triple independent displays, dual 2.5GbE LAN, M.2, USB 3.2, SATA 6Gb/s, and RoHS

● LGA1700 12th/13th Generation Intel® Core™ i9/i7/i5/i3, Pentium® and Celeron® processor (125W)
● Dual-channel DDR5 4800MHz
● Support DisplayPort 1.4a, HDMI & IDPM modules
● Support two M.2 M key for NVMe storage
● High-performance ATX motherboard with PCIe Gen4 & Gen5 expansion slots

Specification

CPU: LGA1700 socket supports 12th/13th generation Alder Lake-S Intel® Core™ i9/i7/i5/i3/Pentium®/Celeron® Processor (up to 125W TDP CPU)
Chipset: Intel® R680E
BIOS: AMI UEFI BIOS
Memory: Four 288-pin 4800 MHz dual-channel DDR5 SDRAM unbuffered DIMMs support up to 128GB (ECC & non-ECC supported)
Graphics Engine: New Intel® Xe Graphics architecture with SRIOV, Genlock
Display Output: Triple independent display; 1 x DP (up to 4096 x 2304 @60Hz); 1 x HDMI (up to 4096 x 2304 @30Hz); 1 x IDPM IEI eDP/ LVDS/ VGA module
Ethernet: LAN1: Intel® I225V 2.5GbE controller (colay I225-LM support vPro); LAN2: Intel® I225V 2.5GbE controller (colay I225-LM support vPro)
External I/O Interface: 4 x USB 3.2 Gen 2 (Type-A) (10Gb/s); 2 x USB 3.2 Gen 1 (Type-A) (5Gb/s); 2 x RS-232/422/485 (RS-485 support AFC)
Internal I/O Interface: 6 x SATA 6Gb/s (RAID 0/1/5/10 supported); 4 x USB 2.0 (2x4 pin, P=2.54); 2 x USB 3.2 Gen 1 (2x10 pin, P=2.00, wafer) (5Gb/s); 4 x RS-232 (2x5 pin, P=2.54)
SMBus: 1 x SMBus (1x4 pin)
I2C: 1 x I2C (1x4 pin)
Audio: 1 x IAUDIO supports IEI AC-KIT-888S Audio Kit (2x5 pin)
Front Panel: 1 x Front Panel (2x7 pin, Power LED, HDD LED, Speaker, Power Button, Reset Button)
LAN LED: 2 x LAN LED (1x2 pin)
Expansion: 2 x PCIe Gen5 x16 slot with x8 Signal; 3 x PCIe Gen4 x4 open-end; 2 x PCIe Gen3 x1; 1 x M.2 M Key (2242/2280, PCIe x4 ) NVMe supported; 1 x M.2 M Key (2242/2280, PCIe x2 for SSD) NVMe supported
Digital I/O: 1 x 12-bit digital I/O (2x7 pin)
TPM: Intel® PTT (TPM 2.0)
Fan Connector: 1 x CPU fan connector (1x4 pin); 2 x System fan connector (1x3 pin)
Chassis Open: 1 x Chassis intrusion (1x2 pin)
Power Supply: ATX/AT power supply; Support AT/ATX mode; ErP/EuP Compliant
Watchdog Timer: Software Programmable support 1~255 sec. System reset
Power Consumption: TBD
Operating Temperature: 0°C~60°C
Storage Temperature: -30°C ~ 70°C
Operating Humidity: 5% ~95%, non-condensing
Dimensions: 244mm x 305mm
Weight: GW:1200g / NW:700g
Certification: CE/FCC compliant