Deutsch
English
Description
EPIC SBC with Intel® D2550/N2600, DDR3, VGA/HDMI/Dual LVDS, Dual GbE, USB 3.0, mSATA, SATA 3Gb/s, Audio and RoHS
● EPIC form factor with Intel® D2550/N2600 dual-core proccessor supporting DDR3/DDR3L (1.35V) memory
● Wide range 9V ~ 28V DC input design
● Flexible VGA, dual LVDS and HDMI with dual-display support
● Supports PC/104-Plus and PCIe Mini card slot compatible with mSATA SSD storage
● Complete I/O with six USB, two SATA 3Gb/s, four COM and audio
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery
Specification
- CPU
- Intel® dual core Atom™ D2550 1.86GHz processor
Intel® dual core Atom™ N2600 1.6GHz processor
Intel® dual core Atom™ N2800 1.86GHz processor (optional) - System Chipset
- Intel® NM10
- BIOS
- UEFI BIOS
- System Memory
- 1 x 1066MHz DDR3 SO-DIMM supporting up to 4GB (for D2550 and N2800)
1 x 800MHz DDR3 SO-DIMM supporting up to 2GB (for N2600) - Ethernet
- Dual GbE by Realtek RTL8111E controllers
- I/O Interface
- 3 x RS-232
1 x RS-422/485
4 x USB 2.0
1 x microSD (Only for boot up to DOS)
2 x USB 3.0
1 x 6-pin wafer for PS/2 KB/MS
2 x SATA 3Gb/s with 5V power connector (SATA1 and mSATA shares SATA signal) - SMBus
- 1 x 4-pin wafer connector
- Audio
- Realtek ALC662 HD audio codec
- Display Interfaces
- Dual display supported
1 x VGA (up to 1920 x 1200 @60Hz)
(Due to Intel GMA driver limitation, the monitor connected to the VGA connector may not have signal to it or become extended desktop after restarting from the graphics driver installation. To solve this problem, press the Ctrl+Alt+F1 hotkey to switch the primary screen to CRT mode.)
1 x HDMI (up to 1920 x 1200 @60Hz)
LVDS1 integrated in the D2550/N2600
Single-channel 24-bit LVDS by D2550, resolution support up to 1440x900 @60Hz
Single-channel 18-bit LVDS by N2600 and N2800, resolution support up to 1366x768 @60Hz
LVDS2 supports 24-bit dual-channel by CH7511 DP to LVDS converter, resolution support up to
1920x1200 for D2550, 1600x1200 for N260/N2800 - Expansion
- 1 x PCIe Mini card (compatible with mSATA SSD device) (SATA1 and mSATA shares SATA signal)
1 x PC/104 slot (ISA)
1 x PCI/104 slot (PCI) - Watchdog Timer
- Software programmable supports 1~255 sec. system reset
- Power Supply
- Maximum input voltage range: 9V ~ 28V
Recommended operating input voltage range: 12V ~ 24V
One internal 4-pin (2x2) power connector
- Power Consumption
- [email protected] (Intel® D2550 1.86GHz CPU with 1333MHz 2GB DDR3 memory)
[email protected] (Intel® N2600 1.6GHz CPU with 1333MHz 2GB DDR3 memory) - Graphic
- GMA 3650 at 640MHz graphics core speed (for N2550 and N2800)
GMA 3600 at 400MHz graphics core speed (for N2600) - GPIO
- 8-bit GPIO
- Operating Temperature
- -20°C ~ 60°C with free air, -20°C ~ 70°C with force air for D2550 processor
-20°C ~ 70°C with free air, -20°C ~ 75°C with force air for N2600/N2800 processor - Humidity
- 5% ~ 95%, non-condensing
- Weight
- GW: 670g/NW: 350g
- Fan Connector
- 1 x 3-pin CPU fan connector
1 x 3-pin system fan connector
Filter criteria
- Customs Tariff Number
- 84733020
- Applications
- Machine Building
- Form Factor
- EPIC
- Socket
- (with Processor)
- Processor
- Atom
- Clock Speed
- 1.86GHz
- Status
- Phased out
- Manufacturer
- IEI
Packing list
- 1 * NANO-CV-D25501/N26001 single board computer
- 1 * PS/2 KB/MS Y cable (P/N:32006-001100-100-RS)
- 1 * SATA with 5V output cable (P/N:P/N: 32801000201-100-RS)
- 1 * Power cable (P/N:P/N: 32100-087100-RS)
- 1 * Audio cable (P/N:32007-002600-100-RS)
- 1 * USB cable (P/N:32000-070301-RS)
- 1 * RS-232 cable (P/N:32200-000049-RS)
- 1 * One Key Recovery CD
- 1 * Mini jumper pack
- 1 * Utility CD
- 1 * QIG (Quick Installation Guide)