Deutsch
English
Description
Intelligent RS-232 to CAN Converter
The PC can be the CAN host, monitor or HMI to access/control the CAN device through the CAN network by the I-7530 converter. The programmable RS-232 device (For example: PACs of ICP DAS) can use the serial port to connect to the CAN network via the I-7530 module. The I-7530 is designed to unleash the power of CAN bus via RS-232 communication method. It accurately converts messages between CAN and RS-232 networks. This module let you communicate with CAN devices easily from any PC or devices with RS-232 interface.
● Compatible with CAN specification 2.0A and B
● Fully compatible with ISO 11898-2 standard
● Support various baud rate from 10K bps to 1M bps
● Jumper for 120 Ω terminator resistor
● Software configurable CAN and RS-232 communication parameters
● 1000 frames in CAN received buffer, 900 frames in RS-232 received buffer
● Watchdog inside
● Support transparent communication mode
Specification
- Item
- I-7530
- Hardware
- EEPROM
- 2 KB (for system information), 100,000 erase/write cycles
- CAN Interface
- Transceiver
- NXP 82C250
- Channel number
- 1
- Connector
- 9-pin male D-Sub (CAN_L, CAN_H, N/A for others)
- Baud Rate (bps)
- 10 k, 20 k, 50 k, 125 k, 250 k, 500 k, 800 k, 1 Mbps
- (allow user-defined CAN baud rate)
- Isolation
- 3000 VDC for DC-to-DC,
- 2500 Vrms for photo-couple
- Terminator Resistor
- Selectable 120Ω terminator resistor by jumper
- Specification
- ISO-11898-2, CAN 2.0A and CAN 2.0B
- Receive Buffer
- 1000 data frames
- RS-232 Interface
- Connector
- 9-pin female D-Sub (TxD, RxD, GND, N/A for others )
- Baud Rate (bps)
- 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200bps
- Data bit
- 5, 6, 7, 8
- Stop bit
- 1, 2
- Parity bit
- None, Even, Odd
- Receive Buffer
- 900 data frames
- LED
- Round LED
- ON LED: Power and Data Flow; ERR LED: Error Status
- Power
- Protection
- Power reverse polarity protection, Over-voltage brown-out protection
- Power Consumption
- 1 W
- Mechanism
- Installation
- DIN-Rail
- Dimensions
- 72mm x 118mm x 33mm (W x L x H)
- Environment
- Operating Temp.
- -25 ~ 75 ℃
- Storage Temp.
- -30 ~ 80 ℃
- Humidity
- 10 ~ 90% RH, non-condensing
Filter criteria
- Customs Tariff Number
- 85176200
- Isolation
- yes
- Input protocol
- CAN
- Host Interface
- Serial
- Target Interface
- CAN
- RS-232
- 01
- Status
- Standard
- Manufacturer
- ICPDAS