Deutsch
English
Description
Industrial Gigabit PoE Ethernet to fiber media converter with 1x10/100/1000Base-T(X) P.S.E. and 1x100/1000Base-X, SFP socket
The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup.
The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.
The IGPMC-111GP with wide operating temperature range from -40 ~ 75°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating environment.
Specification
- Physical Ports
- 10/100/1000 Base-T(X) P.S.E. Port in RJ45 Auto MDI/MDIX
- 1
- 100/1000Base-X SFP port
- 1
- Technology
- Ethernet Standards
- IEEE 802.3i for 10Base-T
- IEEE 802.3u for 100Base-TX and 100Base-FX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3z for 1000Base-X
- IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
- Jumbo Frame
- 9K Bytes (1G mode only)
- LED Indicators
- Power / Ready Indicator
- Green: Power LED x 2
- LFP statue indicator
- Amber LED – (ON) LFP function fail / (OFF) LFP function disable
- 100/1000Base-X SFP Port Indicator
- Green for port Link/Act
- 10/100/1000Base-T(X) Port Duplex Mode Indicator
- Green LED – (ON) Full-duplex mode / (OFF) Half-Duplex mode
- 10/100/1000Base-T(X) RJ45 port Indicator
- Green for Link/Act
- Dual color LED for speed – Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
- Fault Indicator (Fault)
- Amber : Indicate unexpected event occurred
- PoE indicator
- Green: Power is supplied over Ethernet cable.
- Fault Contact
- Relay
- Relay output to carry capacity of 1A at 24 VDC
- Power
- Input Power
- Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block
- Power Consumption (Typ.)
- 4Watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 40 (W) x70 (D) x 95 (H) mm
- Weight (g)
- 291g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 75°C (40 to 167°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 5 years
Filter criteria
- Ethernet
- Gigabit
- Ports in total
- 02
- Ports RJ45
- 01
- Ports SFP
- 01
- Ports Fiber
- 00
- POE
- P.S.E.
- Host Interface
- Ethernet
- Target Interface
- Fiber
- Status
- Standard
- Manufacturer
- ORING
- Customs Tariff Number
- 85176200
- WEEE Number
- DE 76344510