RGS-P9000-HV

Description

Industrial Layer-3 IEC 61850-3 modular rack mount managed Gigabit Ethernet switch with 4 slots

RGS-PR9000 is Layer-3 modular managed redundant ring Ethernet switch with 4 slots. The switch is designed for power substation application and rolling stock application, fully compliant with the requirement of IEC 61850-3 and IEEE 1613. With completely support of Ethernet Redundancy protocol, O-Ring (recovery time < 30ms over 250 units of connection) and MSTP (RSTP/STP compatible) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. And support wide operating temperature from -40 oC to 85 oC (If use 10G SFP module then operating temperature is -20°C ~ 60°C). RGS-PR9000 can also be managed centralized and convenient by Open-Vision, as well as the Web-based interface, Telnet and console (CLI) configuration. Therefore, the switch is one of the most reliable choice for highly-managed and Fiber Ethernet power substation and rolling stock application.

Specification

Physical Ports
Slot Number: 4 (up to 3 slots for 8x1G ports and 1 slot for 4x10G port)
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3ab for 1000Base-T; IEEE 802.z for 1000Base-X; IEEE 802.3ae for 10Gigabit Ethernet; IEEE 802.3x for Flow control; IEEE 802.3ad for LACP (Link Aggregation Control Protocol ); IEEE 802.1p for COS (Class of Service); IEEE 802.1Q for VLAN Tagging; IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol); IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol); IEEE 802.1x for Authentication; IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table: 32K
Priority Queues: 8
Processing: Store-and-Forward
Switch Properties: Switching latency: 7 us; Switching bandwidth: 128Gbps; Max. Number of Available VLANs: 4095; VLAN ID Range : 1 to 4094; IGMP multicast groups: 128 for each VLAN; Port rate limiting: User Define
Jumbo frame: Up to 10K Bytes
Security Featues: Device Binding security feature; Enable/disable ports, MAC based port security; Port based network access control (802.1x); MAC-based authentication; MAC address limit; VLAN (802.1Q ) to segregate and secure network traffic; Radius centralized password management; SNMPv3 encrypted authentication and access security; Https / SSH enhance network security; Web and CLI authentication and authorization; IP source guard
Software Features: Hardware routing, RIP and static routing; IEEE 1588v2 clock synchronization; IEEE 802.1D Bridge, auto MAC address learning/aging and MAC address (static); Multiple Registration Protocol (MRP); MSTP (RSTP/STP compatible); Redundant Ring (O-Ring) with recovery time less than 30ms over 250 units; TOS/Diffserv supported; Quality of Service (802.1p) for real-time traffic; VLAN (802.1Q) with VLAN tagging; IGMP v2/v3 Snooping; IP-based bandwidth management; Application-based QoS management; DOS/DDOS auto prevention; Port configuration, status, statistics, monitoring, security; DHCP Server/Client; DHCP Relay; Modbus TCP; SMTP Client; SNTP Server
Network Redundancy: O-Ring; O-Chain; *note MRP; MSTP(RSTP/STP compatible)
RS-232 Serial Console Port: RS-232 in RJ-45 connector with console cable. 115200bps, 8, N, 1
LED Indicators
Power Indicator (PWR): Green : Indicates that the system ready. The LED is blinking when the system is upgrading firmware
Power Indicator (PWR1 / PWR2): Green : Power LED x 2
Ring Master Indicator (R.M.): Green : Indicates that the system is operating in O-Ring Master mode
O-Ring Indicator (Ring): Green : Indicates that the system operating in O-Ring mode; Green Blinking : Indicates that the Ring is broken.
Fault Indicator (Fault): Amber : Indicate unexpected event occurred
Reset To Default Running Indicator (DEF): Green : System resets to default configuration
Supervisor Login Indicator (RMT): Green : System is accessed remotely
Smart LED Display system: Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) green LED indicator x 4; Mode select Button (MODE) : Link/Act(LK/ACT) / Speed(SPD) / Duplex(FDX) / Remote (RMT) mode select button Port 1 ~ 28 Link/Act(LK/ACT) LED show : Green x 28
Fault Contact
Relay: Relay output to carry capacity of 1A at 24VDC
Power
Redundant power input modular: Dual 100~240VAC / 100~370VDC power inputs at terminal block
Power Consumption (Typ.): 43.5Watts max.
Overload Current Protection: Present
Physical Characteristics
Enclosure: 19 inches rack mountable
Dimensions (W x D x H): 440 (W) x 325 (D) x 44 (H) mm (17.32x12.8x1.73 inches)
Weight (g): 6600 g
MTBF(mean time between failures)
Time: 246,537hrs (Note 1)
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: 10G SFP+ module absent : -40 to 85°C; 10G SFP+ module used: -20 to 60 °C; 24VDC~36VDC; 10G SFP+ module used: -20 to 50 °C; 36VDC~72VDC; 10G SFP+ module absent : -40 to 85°C; 36VDC~72VDC; 10G SFP+ module used: -20 to 60 °C
Operating Humidity: 5% to 95% Non-condensing
Regulatory Approvals
Power Automation: IEC 61850-3, IEEE 1613
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: IEC61000-4-2 (ESD), IEC61000-4-3 (RS), IEC61000-4-4 (EFT), IEC61000-4-5 (Surge), IEC61000-4-6 (CS), IEC61000-4-8, IEC61000-4-11