Deutsch
English
Description
4G+1G Combo Port Gigabit Unmanaged Ethernet Switch with 4 IEEE 802.3af/at PoE+ ports
The NSM-205GP is 5-port unmanaged full Gigabit Ethernet switch supporting Power-over-Ethernet on ports 1 to 4.
The switch is classified as power source equipment (PSE), and when used in this way, the NSM-205GP switch enable
centralization of the power supply, providing up to 30 watts. The NSM-205GP can be used to power IEEE 802.3af/at standard devices (PD).Voltage boost technology supports 24V industrial power sources ensuring that a full and proper PSE voltage is available across all PoE ports
● Full Gigabit Ethernet ports
● 4 PoE/PoE+ PSE capable ports, fully compliant to IEEE 802.3af/at
● 24/48 VDC flexible redundant power inputs
● Supports 10 KB jumbo frames
● Pluggable SFP transceiver port
● Supports Auto Negotiation and Auto MDI/MDI-X
● Supports Dual +18 ~ 55 VDC power input and 1 relay output
● Supports operating temperatures from –40 ~ +75°C
● Slim packaging fits on your DIN-Rail Mounting
Specification
- Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3x for Flow Control
- IEEE 802.3af Power Over Ethernet
- IEEE 802.3at Power Over Ethernet
- Energy Efficient Ethernet (EEE) as per 802.3az; this provides power savings during idle network activity
- Processing Type
- Store & forward, wire speed switching
- MAC Addresses
- 8K
- Memory Bandwidth
- 10 Gbps
- Frame buffer memory
- 1 Mbit
- Jumbo Frames
- 10K for Speed 1000M
- Flow Control
- IEEE802.3x flow control, back pressure flow control
- Interface
- RJ-45 Ports
- 10/100/1000 BaseT(X), 10/100BaseT(X) auto negotiation speed, full/half duplex mode, and auto MDI/MDI-X connection
- Fiber Port
- 1000BaseSFP slot/100BaseSFP slot
- LED Indicators
- PWR1, PWR2, Power fail, 10/100M, 1000M, Link/Act, Power Device is detected
- Ethernet Isolation
- 1500 Vrms 1 minute
- DIP Switch
- 100BaseSFP/1000BaseSFP and PoE/PoE+ setting
- Power Input
- Redundant Input Range
- Flexible input +24/+48 VDC Nominal. ( +18 ~ +55 VDC)
- Power Consumption
- 0.13@ 48 VDC without PD loading; 3.1 A @ 48 VDC with PD full loading (30 W per ports)
- 0.25@ 24 VDC without PD loading; 6.2 A @ 24 VDC with PD full loading (30 W per ports)
- Alarm Contact
- One relay output with current carrying capacity of 1A @ 30 VDC
- Protection
- Power reverse polarity protection
- Connector
- 6-Pin Removable Terminal Block (Power & Relay)
- Mechanical
- Chassis
- Metal with an IP30 ingress protection rating
- Dimensions (W x L x H)
- 28 mm x 160 mm x 122 mm
- Installation
- DIN-Rail or Wall Mounting (with optional kit)
- Environment
- Operating Temperature
- -40 °C ~ + 75 °C ( -40° F to 167° F )
- Storage Temperature
- -40 °C ~ + 85 °C (-40 F to 185° F)
- Ambient Relative Humidity
- 10 ~ 90% RH, non-condensing
Filter criteria
- Customs Tariff Number
- 85176200
- Ethernet
- Gigabit
- Ports in total
- 05
- Ports RJ45
- 04
- Ports SFP
- 01
- Ports Fiber
- 00
- POE
- P.S.E.
- Management
- unmanaged
- Status
- Standard
- Manufacturer
- ICPDAS