IGPS-1080-24V

Description

Industrial 8-port unmanaged Gigabit PoE Ethernet switch with 8x10/100/1000Base-T(X) P.S.E., 24VDC power inputs

IGPS-1080-24V is the unmanaged Gigabit PoE Ethernet switch with P.S.E. function and relay output of 24VDC at 1A. IGPS-1080-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1080-24V supports wide-range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. IGPS-1080-24V PoE switch has 8 x 10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

• IGPS-1080-24V provides 8x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Supports IEEE 802.3at compliant PoE and total power budget is 120 Watts with maximum 30 Watts per port
• Supports dual wide range 24~36VDC power inputs for power redundancy
• Supports Jumbo frame up to 9KBytes
• Supports auto-negotiation and auto-MDI/MDI-X
• Supports store and forward transmission
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

Specification

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 With P.S.E.: 8
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T,; IEEE 802.3u for 100Base-TX; IEEE 802.3ab for 1000Base-T; IEEE 802.3x for Flow control; IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table: 2048 MAC addresses
Processing: Store-and-Forward
LED Indicators
Power Indicator: Green : Power LED x 2
Fault Indicator: Amber : Indicate PWR1 or PWR2 failure
10/100/1000Base-T(X) RJ45 port and PoE indicator: Green for port Link/Act.; Green for PoE power injected.
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC
DIP-Switch
DIP-Switch 1: Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2: Power-2 failed warning : (ON) enable, (OFF) disable
Power
Redundant Input power: Dual DC inputs. 24~36VDC on 6-pin terminal block.
Power consumption (Typ.): 7.8 Watts
Overload current protection: Present
Reverse polarity protection: NOT Present
Physical Characteristic
Enclosure: IP-30
Dimension (W x D x H): 41(W) x 94.9(D) x 144.3(H) mm
Weight (g): 452 g
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 70°C (-40 to 158°F)
Operating Humidity: 5% to 95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950-1
Warranty: 5 years