Deutsch
English
Description
Industrial 6-port slim type unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E. and 2x100/1000Base-X, SFP socket
IGPS-1042GPA is an slim type unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GPA supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GPA has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GPA supports wide range 50~57VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.
• Provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• Supports Jumbo frame up to 9KBytes
• SFP port support 100Base-FX and 1000Base-X speed
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forward transmission
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled
Specification
- Physical Ports
- 10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX
- 4
- 100/1000Base-X SFP port
- 2
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX
- IEEE 802.3ab for 1000Base-T
- IEEE 802.3z for 1000Base-X
- IEEE 802.3x for Flow control
- IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
- MAC Table
- 1K MAC addressessses
- Processing
- Store-and-Forward
- LED Indicators
- Power indicator
- Green : Power LED x 2
- Fault Indicator
- Amber : Indicates PWR1 or PWR2 failure occurred
- 10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)
- Green for port Link/Act.
- Green for PoE power injected
- 100/1000Base-X SFP port indicator (P5 ~ P6)
- Green for port Link/Act.
- SFP Speed DIP-Switch
- DIP-Switch 1/2
- DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
- DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
- Relay Output DIP-Switch
- DIP-Switch 1
- Power-1 failed warning : (ON) enable, (OFF) disable
- DIP-Switch 2
- Power-2 failed warning : (ON) enable, (OFF) disable
- Fault contact
- Relay
- Relay output to carry capacity of 1A at 24VDC
- Power
- Redundant Input Power
- Dual DC inputs. 50~57VDC on 6-pin terminal block.
- Power consumption (Typ.)
- 6.3 Watts
- Overload current protection
- Present
- Reverse polarity protection
- Not Present
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 26.1 (W) x 94.9 (D) x 144.3(H) mm
- Weight (g)
- 410 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 5 years
Filter criteria
- Customs Tariff Number
- 85176200
- Applications
- Building Automation
- Ethernet
- Gigabit
- Ports in total
- 06
- Ports RJ45
- 04
- Ports SFP
- 02
- Ports Fiber
- 00
- POE
- P.S.E.
- Management
- unmanaged
- Status
- Standard
- Manufacturer
- ORING