Deutsch
English
Beschreibung
4-channel Isolated DI and 8-channel Isolated DO Module
The I-7044 offers 4 channels for digital input and 8 channels for digital output, each of which features Photocouple isolation. The I-7044 supports sink-type output using open collector and sink- or source-type input via wire connections. All input channels are able to be used as 16-bit counters. There are options to enable both power-on and safe values . The I-7044D has 12 LED indicators for DI and DO channel status monitoring. 3750 Vrms intramodule isolation are standard. The hardware specifi cations for the M-7044 are the same as the I-7044 and both support the Modbus RTU and DCON protocols which can be confi gured via software.
● 8 Digital Outputs and 4 Digital Inputs
● Open Collector Output
● Photocouple Isolation
● Digital Input Channels Can Be Used As 16-bit Counters
● Configurable Power-on Value Settings
● Configurable Safe Value Settings
● 3750 Vrms Isolation Voltage
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
Spezifikation
- Models
- I-7044
- Digital Input/Counter
- Channels
- 4
- Type
- Dry Contact
- -
- Wet Contact
- Sink/Source
- Wet Contact
- ON Voltage Level
- +1 VDC Max.
- OFF Voltage Level
- +4 ~ 30 VDC
- Dry Contact
- ON Voltage Level
- -
- OFF Voltage Level
- -
- Effective Distance
- -
- for Dry Contact
- Counters
- Max. Count
- 65535 (16-bit)
- Max. Input
- 100 Hz
- Frequency
- Min. Pulse Width
- 5 ms
- Input Impedance
- 3 kΩ
- Channel-to-Channel Isolation
- -
- Overvoltage Protection
- ±35 VDC
- Digital Output
- Channels
- 8
- Type
- Open Collector
- Sink/Source (NPN/PNP)
- Sink
- Load Voltage
- +3.5 ~ 30 VDC
- Max. Load Current
- 375 mA/Channel
- Overvoltage Protection
- -
- Overload Protection
- -
- Power-on Value
- Yes
- Safe Value
- Yes
- Models
- I-7044
- Communication
- Interface
- RS-485
- Bias Resistor
- No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
- Format
- (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
- Baud Rate
- 1200 to 115200 bps
- Protocol
- DCON
- Dual Watchdog
- Yes, Module (1.6 Seconds), Communication (Programmable)
- LED Indicator/Display
- System LED Indicator
- Yes, 1 as Power/Communication Indicator
- I/O LED Indicator
- Yes
- 7-Segment LED Display
- -
- Isolation
- Intra-Module Isolation, Field-to-Logic
- 3750 Vrms
- EMS Protection
- ESD (IEC 61000-4-2)
- ±2 kV Contact for each Terminal
- EFT (IEC 61000-4-4)
- ±2 kV for Power Line
- Surge (IEC 61000-4-5)
- -
- Power
- Reverse Polarity Protection
- Yes
- Input Range
- +10 ~ +30 VDC
- Consumption
- 1.7 W
- Mechanical
- Dimensions (L x W x H)
- 123 mm x 72 mm x 35 mm
- Installation
- DIN-Rail or Wall Mounting
- Environment
- Operating Temperature
- -25 to +75°C
- Storage Temperature
- -40 to +85°C
- Humidity
- 10 to 95% RH, Non-condensing
Filterkriterien
- Zollnummer
- 85176200
- Isoliert
- ja
- Digital In
- 04
- Eingabe Protokoll
- DCON
- Digital Out
- 08
- Host-Schnittstelle
- Seriell
- Status
- Standard
- Hersteller
- ICPDAS