Deutsch
English
Beschreibung
10-channel Analog Input Module
I-7017Z is an 10-ch differental or 20-ch single-ended voltage inputs module by software selectable with an extremely excellent protection mechanism where Overvoltage protection is up to 240 Vrms. Its input type includes both voltage and current. Naturally, I-7017Z is an upgraded version of I-7017; the only difference is that the I-7017Z is much more suitable for critically harsh environment! The sampling rate of I-7017Z is changeable; there are fast mode and normal mode for your consideration. I-7017Z also has qualifi cation for 4 KV ESD protection as well as 3000 VDC intra-module isolation.
● 10-ch Differental or 20-ch Single-ended
● Voltage and Current Inputs
● High Resolution: 16-bit
● Overvoltage Protection is up to 240 Vrms
● Changeable Sampling Rate
● 4 kV ESD Protection
● 3000 VDC Intra-Module Isolation
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
Spezifikation
- Models
- I-7017Z
- Analog Input
- Channels
- 44105
- Wiring
- 10 Differential or 20 Single-ended (Software Selectable - see Note 1)
- Sensor Types
- Voltage
- ±150 mV, ±500 mV, ±1 V, ±5 V, ±10 V
- Current
- ±20 mA , 0 ~ +20 mA, +4 ~ +20 mA (Jumper Selectable)
- Resolution
- 16-bit
- Accuracy
- Normal Mode
- ±0.1% of FSR
- Fast Mode
- ±0.5% of FSR
- Sampling Rate
- Normal Mode
- 10 Hz
- Fast Mode
- 60 Hz
- Input Impedance
- Voltage
- 2 MΩ (Differential)
- 1 MΩ (Single-ended)
- Current
- 125 Ω (Differential)
- Common Voltage Protection
- ±200 VDC
- Individual Channel Configuration
- Yes
- Overvoltage Protection
- 240 Vrms
- Overcurrent Protection
- Yes, 50 mA at 110 VDC
- Temperature Output Consistency
- Yes, 400 VDC
- Open Wire Detection for +4 ~ +20 mA
- Yes
- Note 1: Differential wiring can be used for both voltage input and current input.
- Single-ended wiring can only be used for voltage input
- Models
- I-7017Z
- Communication
- Interface
- RS-485
- Bias Resistor
- No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
- Format
- N, 8, 1
- Baud Rate
- 1200 to 115200 bps
- Protocol
- DCON
- Dual Watchdog
- Yes, Module (1.6 Seconds), Communication (Programmable)
- LED Indicator/Display
- System LED Indicator
- Yes, 1 as Power/Communication Indicator
- I/O LED Indicator
- -
- 7-Segment LED Display
- -
- Isolation
- Intra-Module Isolation, Field-to-Logic
- 3000 VDC
- EMS Protection
- ESD (IEC 61000-4-2)
- ±4 kV Contact for each Terminal
- EFT (IEC 61000-4-4)
- ±4 kV for Power Line
- Surge (IEC 61000-4-5)
- ±0.5 kV for Power Line
- Power
- Reverse Polarity Protection
- Yes
- Input Range
- +10 ~ +30 VDC
- Consumption
- 2.0 W
- Mechanical
- Dimensions (L x W x H)
- 123 mm x 72 mm x 35 mm
- Installation
- DIN-Rail or Wall Mounting
- Environment
- Operating Temperature
- -25 to +75°C
- Storage Temperature
- -40 to +85°C
- Humidity
- 10 to 95% RH, Non-condensing
Filterkriterien
- Zollnummer
- 85176200
- Eingabe Protokoll
- DCON
- Analog In
- 20
- Host-Schnittstelle
- Seriell
- Status
- Standard
- Hersteller
- ICPDAS