Deutsch
English
Beschreibung
100Mbps SFP optical transceiver
IPMC-111PB is a cost-effective solution for the conversion interface between 10/100Base-T(X) and 100Base-FX, it allows you to extend communication distance by optical fiber. IPMC-111PB supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IPMC-111PB also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPMC-111PB has 1x10/100Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup. IPMC-111PB with wide operating temperature range from -40°C~70°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments.
IPMC-111PB also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IPMC-111PB will force the link to shutdown as soon as noticed that the other link has failed, to notice the administrator to react to the situation. Therefore, the IPMC-111PB is reliable media converter with PoE capability and can satisfy most demand of operating environment
• Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
• Supports Ethernet to fiber with SFP socket
• Support LFP (Link Fault Pass-through) function
• Supports full/half duplex operation mode
• P.S.E. fully compliant with IEEE802.3at standard, provide up to 30 Watts
• Supports store and forward transmission
• Provided DIP-Switch to set operation mode
• High reliability and rigid IP-30 housing
• DIN-Rail and panel mounting enabled
Spezifikation
- Physical Ports
- 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 1
- Technology
- Ethernet Standards
- IEEE 802.3 for 10Base-T
- IEEE 802.3u for 100Base-TX and 100Base-FX
- IEEE 802.3x for Flow control
- IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
- Processing
- Store-and-Forward
- DIP-Switch setting
- DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable
- DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate
- DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate
- DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
- LED Indicators
- Power indicator
- Green : Power LED x 2 (ON : power input on-line / (OFF) power input off-line
- 10/100Base-T(X) RJ45 port indicator
- Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down
- Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps
- Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- 100Base-FX fiber port indicator
- Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down
- Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
- LFP statue indicator
- Amber LED – (ON) LFP function fail / (OFF) LFP function disable
- PoE indicator
- Amber for P.S.E. indicator
- Power
- Input power
- Dual 50~57 VDC voltage power inputs at 4-pin terminal block
- Power consumption (Typ.)
- 31.2 Watts (P.S.E. output included)
- Overload current protection
- Present
- Reverse polarity protection
- Present
- Physical Characteristic
- Enclosure
- IP-30
- Dimension (W x D x H)
- 26.1 (W) x 70 (D) x 95 (H)mm (1.03 x 2.76 x 3.74 inch)
- Weight (g)
- 210 g
- Environmental
- Storage Temperature
- -40 to 85°C(-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2, EN55011, EN50121-4)
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,
- EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 5 years
Filterkriterien
- Zollnummer
- 85176200
- Applikationen
- Bildverarbeitung
- POE
- P.S.E.
- Status
- Archiviert
- Hersteller
- ORING