FRAGEN SIE UNS
Beschreibung

Industrial 6-port unmanaged Gigabit PoE Ethernet switch with 4x10/100/1000Base-T(X) P.S.E and 2x100/1000Base-X, SFP socket, 24VDC power inputs


IGPS-1042GP-24V is an unmanaged PoE Ethernet switch with P.S.E. function. IGPS-1042GP-24V supports Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. IGPS-1042GP-24V has 4x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) ports, and 2x100/1000Base-X SFP port. The SFP port optical network speed can be set by changing the settings of the DIP-Switch below. IGPS-1042GP-24V supports wide range 24~36VDC power inputs and generates 50VDC P.S.E. power output per port. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. The wide operating temperature range from -40oC to 70oC can satisfy most of operating environment. Therefore, the switch is one of the most reliable choices for PoE Ethernet application.

• Provide 4x10/100/1000Base-T(X) PoE (P.S.E.) ports
• Support P.S.E. based on IEEE 802.3at standard up to 30 Watts per port
• Supports Jumbo frame up to 9KBytes
• SFP port support 100Base-FX and 1000Base-X speed
• Support auto-negotiation and auto-MDI/MDI-X
• Support store and forward transmission
• Advanced PoE power boost technology to support dual 24VDC power inputs
• Supports flow control
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

Spezifikation

Filterkriterien

Zollnummer
85176200
Applikationen
Gebäude Automation
Ethernet
Gigabit
Ports gesamt
06
Ports RJ45
04
Ports SFP
02
Ports Fiber
00
POE
P.S.E.
Management
unmanaged
Status
Standard
Hersteller
ORING

Spezifikation

Physical Ports
10/100/1000Base-T(X) Ports in RJ45 with P.S.E. Auto MDI/MDIX
4
100/1000Base-X SFP port
2
Technology
Ethernet Standards  
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3x for Flow control
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
MAC Table
1K MAC addressessses
Processing
Store-and-Forward
LED Indicators
Power indicator
Green : Power LED x 2
Fault Indicator
Amber : Indicates PWR1 or PWR2 failure occurred
10/100/1000Base-T(X) RJ45 port indicator and PoE indicator (P1 ~ P4)
Green for port Link/Act.
Green for PoE power injected
100/1000Base-X SFP port indicator (P5 ~ P6)
Green for port Link/Act.
SFP Speed DIP-Switch
DIP-Switch 1/2
DIP-Switch 1 (ON) and DIP-Switch 2 (ON) : SFP speed setting to 100Mbps
DIP-Switch 1 (OFF) and DIP-Switch 2 (OFF) : SFP speed setting to 1000Mbps
Relay Output DIP-Switch
DIP-Switch 1
Power-1 failed warning : (ON) enable, (OFF) disable
DIP-Switch 2
Power-2 failed warning : (ON) enable, (OFF) disable
Fault contact
Relay
Relay output to carry capacity of 1A at 24VDC
Power
Redundant Input Power
Dual DC inputs. 24~36VDC on 6-pin terminal block.
Power consumption (Typ.)
6.5 Watts
Overload current protection
Present
Reverse polarity protection
Not Present
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
41 (W) x 94.9 (D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inches)
Weight (g)
540 g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8,EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
5 years