IPS-2042TX

Beschreibung

Industrial 6-port lite-managed PoE Ethernet switch with 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X)

IPS-2042TX/2042FX series are lite-managed redundant ring Ethernet switches with 4x10/100Base-T(X) ports with PoE P.S.E. function and 2x10/100Base- T(X) or 2x100Base-FX fiber ports. IPS series support Power over Ethernet, a system to transmit electrical power, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IPS switches has 4X10/100Base-T(X) P.S.E. (Power Sourcing Equipment) ports. P.S.E. is a device (switch or hub for instance) that will provide power in a PoE setup. With complete support of Ethernet Redundancy protocol, O-Ring (recovery time < 10ms over 250 units of connection), Open-Ring, O-Chain and STP/RSTP (IEEE802.1w/D) can protect your mission-critical applications from network interruptions or temporary malfunctions with its fast recovery technology. IPS-2042TX / 2042FX series can be managed centralized and convenient by a powerful windows utility — Open-Vision. The wide operating temperature range from -40°C to 70°C can satisfy most of operating environment. Therefore, the switch is one of the most reliable choice for easy managed and Fiber Ethernet application.

• IPS-2042TX provides 4x10/100Base-T(X) P.S.E. and 2x10/100Base-T(X) ports
• IPS-2042FX series provide 4x10/100Base-T(X) P.S.E. and 2x100Base-FX single/multi mode fiber ports
• Fastest Redundant Ethernet Ring: O-Ring (Recovery time < 10ms over 250 units of connection)
• Open-Ring supports the other vendor’s ring technology in open architecture
• O-Chain support the multiple redundant ring technology
• Provides Fast recovery technology for Ethernet multi-redundancy
• STP/RSTP supported
• SNMP v1/v2c/v3 support for secured network management
• Supports LLDP (Link Layer Discovery Protocol)
• Configurable by Web-based and Windows utility (Open-Vision)
• Event notification through Syslog, Email, and SNMP trap
• Two 100Base-FX fiber port support for long distance connection
• Four P.S.E. ports based on IEEE 802.3af standard – up to 25 Watts per port
• Rigid IP-30 housing design
• DIN-Rail and wall mounting enabled

Spezifikation

Physical Ports
Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX with P.S.E.: 4
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX without P.S.E.: 2
Fiber Ports Number: -
Fiber Ports Standard: -
Fiber Mode: -
Fiber Diameter (μm): -
Fiber Optical Connector: -
Fiber Ports Specifications Typical Distance (km): -
Wavelength (nm): -
Max. Output Optical Power (dBm): -
Min. Output Optical Power (dBm): -
Max. Input Optical Power(Saturation): -
Min. Input Optical Power (Sensitivity): -
Link Budget (dB): -
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3x for Flow control; IEEE 802.1D for STP (Spanning Tree Protocol); IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol); IEEE 802.1AB for LLDP (Link Layer Discovery Protocol); IEEE 802.3af PoE specification (up to 25 Watts per port for P.S.E.)
MAC Table: 2048 MAC addresses
Processing: Store-and-Forward
Switch Properties: Switching bandwidth : 1.2Gbps; VLAN : Port Based
Security Features: Enable/disable ports; VLAN to segregate and secure network traffic
Software Features: STP/RSTP (IEEE 802.1D/w); Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units; Open-Ring support the other vendor’s ring technology in open architecture; Port configuration, status, statistics, monitoring, security; DHCP Client
Network Redundancy: O-Ring; Open-Ring; O-Chain; Fast recovery; STP; RSTP
LED Indicators
Power /PoE Indicator: Green : Power LED x 3, Green : PoE LED x 4
R.M. Indicator: Green : Indicates that the system is operating in O-Ring Master mode
Fault Indicator: Amber : Indicates unexpected event occurred
O-Ring Indicator: Green : Indicates that the system is operating in O-Ring mode
10/100Base-T(X) RJ45 Port Indicator: Green for port Link/Act. Amber for Link
Fiber Port Indicator: Green for port Link/Act. Amber for Link
Power
Redundant Input Power: Triple DC inputs. 2x48VDC on 7-pin terminal block , 1x48VDC on power jack
Power Consumption (Typ.): 5 Watts
Overload Current Protection: Present
Reverse Polarity Protection: Present on terminal block
Physical Characteristics
Enclosure: IP-30
Dimensions (W x D x H): 52(W)x106.1(D)x144.3(H) mm (2.05x4.18x5.68 inch.)
Weight (g): 696 g
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -40 to 70°C (-40 to 158°F)
Operating Humidity: 5% to 95% Non-condensing
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Safety: EN60950-1,
MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C ): 304,333
Warranty: 5 years