Deutsch
English
Beschreibung
Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 1x100Base-FX, multi-mode, 2km/1310nm, SC connector
DS-5011F is an innovative secure 1-port RS-232/422/485 to 1-port optic fiber Ethernet port secure serial to Ethernet device server featuring the standard features of device server, such like TCP/IP interface and versatile operation modes: Virtual Com, Serial Tunnel, TCP Server, TCP Client, UDP. In addition, the Windows utility, DS-Tool, could configure multiple devices and set up the mappings of Virtual Com. The features of NAT Router Pass-Through, DDNS, and PPPoE make it more convenient for administrators to configure ORing’s device servers through NAT router from different IP domains or Internet via modem remotely. On the other hand, IDS-5011F can simultaneously transfer data up to 5 redundant host PCs to aovid Ethernet connection breakdown or any host PC fails. Further, IDS-5011F features HTTPS, SSH, and SSL encryption to assure the security of critical data transmission. IDS-5011F provides dual redundant power inputs, 12~48 VDC, on DC power jack and terminal block to guarantee a non-stop operation. With wide operating temperature, -40~70°C, and rugged IP-30 housing design, IDS-5011F could operate in the harsh industrial environment. Therefore IDS-5011F is the best solution to the high demand of secure serial to Ethernet critical data communication.
• Operating Modes: Virtual Com, Serial Tunnel, TCP Server,TCP Client, UDP
• Redundant multiple host devices : 5 host devices : Virtual COM, TCP Server, TCP Client mode; 4 IP ranges : UDP
• NAT Pass-Through : the user can manage IDS-5011F through NAT router
• Security: SSL data encryption; secured management by HTTPS and SSH: IP Access: IP White List
• Internet Communication: PPPoE
• Update DNS Hostname: DDNS
• Event Warning by Syslog, Email, SNMP trap, and Beeper
• Configurable by Web-based and Windows utility (DS-Tool)
• Various Windows O.S. supported: Windows NT/2000/ XP/ 2003/VISTA (32bit/64bit) /Windows 7 (32bit/64bit)
IDS-5011F-SS-SC
Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 1x100Base-FX, single-mode, 30km/1310nm, SC connector
IDS-5011F-MM-SC
Industrial 1-port secure serial to Ethernet device server with 1xRS-232/422/485 and 1x100Base-FX, multi-mode, 2km/1310nm, SC connector
Spezifikation
- Physical Ports
- Fiber Ports Number
- 1
- Fiber Ports Standard
- 100Base -FX
- Fiber Mode
- Multi-mode
- Fiber Diameter (μm)
- 62.5/125 μm 50/125 μm
- Fiber Optical Connector
- SC
- Typical Distance (km)
- 2 km
- Wavelength (nm)
- 1310 nm
- Max. Output Optical Power (dBm)
- -14 dBm
- Min. Output Optical Power (dBm)
- -23.5 dBm
- Max. Input Optical Power (Saturation)
- 0 dBm
- Min. Input Optical Power (Sensitivity)
- -31 dBm
- Link Budget (dB)
- 7.5 dB
- Connector
- DB9(male) x 1
- Operation Mode
- RS-232 / RS-422 / 4(2)-Wire RS-485. Which can be configured by DS-Tool / web interface
- Serial Baud Rate
- 110 bps to 460.8 Kbps
- Data Bits
- 5, 6, 7, 8
- Parity
- odd, even, none, mark, space
- Stop Bits
- 1, 1.5, 2
- RS-232
- TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
- RS-422
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (4-wire)
- Tx+,Tx-, Rx+, Rx-,GND
- RS-485 (2-wire)
- Data+, Data-,GND
- Flow Control
- XON/XOFF, RTS/CTS, DTR/DSR
- Network Features
- Network Protocols
- ICMP, IP, TCP, UDP, DHCP, BOOTP, SSH, DNS, SNMP V1/V2c, HTTPS, SMTP, SSL, PPPoE, DDNS
- LED Indicators
- Power Indicator
- PWR 1(2) / Ready :
- Red On : Power is on and booting up
- Red Blinking : Indicates an IP conflict, or DHCP or BOOTP server did not respond properly
- Green On : Power is on and functioning Normally
- Green Blinking : Located by Administrator
- 100Base-FX with SC Connector
- Green for port Link/Act at 100Mbps
- Serial TX / RX LEDs
- Red : Serial port is receiving data
- Green : Serial port is transmitting data
- Power
- Redundant Input Power
- Dual DC inputs. 12~48VDC on 3-pin terminal block and power jack
- Power Consumption (Typ.)
- 4 watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present on terminal block
- Physical Characteristics
- Enclosure
- IP-30
- Dimensions (W x D x H)
- 72(W) x 29.4(D) x 123.4(H) mm (2.83x1.16x4.86 inch.)
- Weight (g)
- 325 g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -40 to 70°C (-40 to 158°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory Approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A,
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- MTBF (Hours) (MIL-HDBK-217F2, GB, GC, 25°C )
- 561,145
- Warranty
- 5 years
Filterkriterien
- Zollnummer
- 84733020
- Ethernet
- Fast
- Ports gesamt
- 01
- Ports RJ45
- 00
- Ports SFP
- 00
- Ports Fiber
- 01
- Status
- Archiviert
- Hersteller
- ORING