Deutsch
English
Beschreibung
Industrial EN50155 IEEE 802.11 a/b/g/n wireless access point with 2x10/100 Base-T(X)
ORing’s TransporterTM series access point is designed for industrial and rolling stock wireless applications, such as vehicle, and railway applications. TAP-620-M12 is a reliable 802.11 a/b/g/n WLAN Access Point with 2 Ethernet 10/100 ports. It can be configured to operate in AP/Client /Bridge /AP-Client Mode. TAP-620-M12 provides dual Ethernet ports in switch mode, so that you can use Daisy Chain to reduce the usage of Ethernet switch ports. TAP-620-M12 provides a dust-tight connection and reverses SMA-type connectors that can install any reverse SMA-type antennas to extend communication distance. It is specifically designed for the toughest industrial environments. You are able to configure TAP-620-M12 by WEB interface via LAN port or WLAN interface. TAP-620-M12 can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, TAP-620-M12 is one of the best communication solutions for wireless applications.
• High Speed Air Connectivity: WLAN interface support up to 300 Mbps link speed
• Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
• Support X-Roaming < 100 ms
• Support wireless load balance
• Support external SMA antenna installation
• Support AP/Client /Bridge /AP-Client Mode
• Support MAC Filter
• Dual Ethernet ports support Ethernet redundant mode (Recovery time < 10ms) and switch mode in M12 connector (D-coding)
• Wireless connecting status monitoring
• Secured Management by HTTPS
• Event Warning by Syslog, Email, SNMP Trap, and Relay output
• Rigid IP-40 housing design
• Wall-mount enabled
Spezifikation
- Physical Ports
- 10/100Base-T(X) Ports in M12 Auto MDI/MDIX
- 2 (4-pin M12 connetor – D-coding)
- WLAN Interface
- Operating Mode
- AP/Client/Bridge/Repeater/AP-Client
- Antenna and Connector
- 2 x 2 dBi (2.4GHz) / 3dBi (5GHz) on Reverse SMA connector
- Radio Frequency Type
- DSSS, OFDM
- Modulation
- IEEE802.11a/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
- IEEE802.11b: CCK, DQPSK, DBPSK
- IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
- Frequency Band
- America / FCC:
- 2.412~2.462 GHz (11 channels )
- 5.180~5.240 GHz & 5.745~5.825 GHz ( 9 channels )
- Europe CE / ETSI:
- 2.412~2.472 GHz ( 13 channels )
- 5.180~5.240 GHz ( 4 channels )
- Japan(JP):
- 2.412~2.484 GHz ( 13 channels )
- 5.180~5.240 GHz ( 4 channels )
- Transmission Rate
- IEEE802.11b: 1/2/5.5/11 Mbps
- IEEE802.11a/g: 6/9/12/18/24/36/48/54 Mbps
- IEEE802.11n(40MHz): UP to 300 Mbps
- Transmit Power
- IEEE802.11a:13dBm ±1.5dBm
- IEEE802.11b:16dBm ±1.5dBm
- IEEE802.11g:14dBm ±1.5dBm
- IEEE802.11n(2.4G@20MHz):13dBm ±1.5dBm
- IEEE802.11n(2.4G@40MHz):12dBm ±1.5dBm
- IEEE802.11n(5G@20MHz):12dBm ±1.5dBm
- IEEE802.11n(5G@40MHz):12dBm ±1.5dBm
- Receiver Sensitivity
- IEEE802.11a: -68dBm ±2dBm@54Mbps
- IEEE802.11b: -82dBm ±2dBm@11Mbps
- IEEE802.11g: -68dBm ±2dBm@54Mbps
- IEEE802.11n(2.4G@20MHz,MCS15): -64dBm ±2dBm
- IEEE802.11n(2.4G@40MHz,MCS15): -60dBm ±2dBm
- IEEE802.11n(5G@20MHz,MCS15): -64dBm ±2dBm
- IEEE802.11n(5G@40MHz,MCS15): -60dBm ±2dBm
- Encryption Security
- WEP : (64-bit ,128-bit key supported)
- WPA / WPA2 : 802.11i(WEP and AES encryption)
- WPA-PSK (256-bit key pre-shared key supported)
- 802.1X Authentication supported
- TKIP encryption
- Wireless Security
- SSID broadcast disable
- Protocol Support
- Protocol
- ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, PPPoE, STP (IEEE 802.1D)
- LED Indicators
- Power Indicator
- 2 x LEDs, Green for Power Indicator
- 10/100Base-T(X) Port Indicator
- 2 x LEDs, Green for port Link/Act at 100Mbps, Amber for port Link/Act at 10Mbps
- WLAN LEDs
- 1 x LEDs, Green for WLAN Link /Act
- Fault Indicator
- 1 x LED, Red for Ethernet link down or power down indicator
- Fault contact
- Relay
- Relay output to carry capacity of 3A at 24VDC(5-pin M12 A-Coding)
- Power
- Redundant Input Power
- Dual Power Inputs. 12~48 VDC on 5-pin M23 connector (24 VDC Typ.)
- Power Consumption (Typ.)
- 8W
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristic
- Enclosure
- IP-40
- Dimension (W x D x H)
- 125(W) x 65(D) x 196(H) mm (4.92 x 2.56 x 7.72 inch.)
- Weight (g)
- 825g
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -10 to 60°C (14 to 140°F)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A, EN50155 (EN50121-3-2)
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27, EN61373
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6 , EN61373
- Safety
- EN60950-1
- Warranty
- 3 years
Filterkriterien
- Zollnummer
- 85176200
- Applikationen
- Transport/Logistik
- Status
- Archiviert
- Hersteller
- ORING