Deutsch
English
Beschreibung
Industrial outdoor IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), IP-67 grade, N-type antenna connector
IAP-W420+ / W422+ is a reliable IP-67 outdoor IEEE 802.11 b/g/n WLAN Access Point with 1 PoE P.D. Ethernet port. It can be configured to operate in AP/Client/Repeater/AP-Client mode. It is specifically designed for the toughest industrial environments. In combination with its IP-67 design and the superb management functionality, IAP-W420+ / W422+ provides a waterproof, dust-tight connection. In addition, IAP-W420+ provides high power output of 500mw and high throughput up to 80Mbps to satisfy far distance connection. IAP-W422+ provides two N-type connectors, which can install any N-type antennas to extend communication distance. You are able to configure IAP-W420+ / W422+ by WEB interface via LAN port or WLAN interface. In addition, IAP-W420+ / W422+ also provides P.D. feature which is fully compliant with IEEE802.3af PoE P.D. specification to save the layout cost of power line. The IAP-W420+ / W422+ can be easily adopted in almost all kinds of applications and provides the most rugged solutions for managing your network in outdoor. Therefore, IAP-W420+ / W422+ is one of the best outdoor communication solutions for wireless applications
● High Speed Air Connectivity: WLAN interface support up to 300Mbps link speed
● Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
● High throughput > 80Mbps
● High power output 800mw
● Far Distance Air Connectivity up to 7 KM (IAP-W420+)
● Support X-Roaming < 100 ms
● Support AP/Client/Repeater/AP-Client Mode
● Wireless connecting status monitoring
● HTTPs protocol supported for secured management
● Event Warning by Syslog, Email, SNMP Trap
● Rigid IP-67 housing design
● Pole-mount enabled
Spezifikation
- Physical Ports
- 10/100 Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 2
- WLAN interface
- Operating Mode
- AP/Client/Repeater/AP-Client
- Antenna Connector
- 2 x External N-type antenna connector
- Radio Frequency Type
- OFDM
- Modulation
- IEEE802.11b: CCK, DQPSK, DBPSK
- IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
- Frequency Band
- America / FCC : 2.412~2.462 GHz (11 channels )
- Europe CE / ETSI: 2.412~2.472 GHz ( 13 channels )
- Transmission Rate
- IEEE802.11b: 11, 5.5, 2, 1 Mbps;
- IEEE 802.11g: 54, 48, 36, 24, 18, 12, 9, 6 Mbps
- IEEE 802.11n: up to 300Mbps
- Transmit Power
- 800mw Max.
- Receiver Sensitivity
- -96dBi
- Encryption Security
- WEP: (64-bit ,128-bit key supported)
- WPA/WPA2 :802.11i(WEP and AES encryption)
- WPAPSK (256-bit key pre-shared key supported)
- 802.1X Authentication supported
- TKIP encryption
- Wireless Security
- SSID broadcast disable
- Protocol Support
- Protocol
- ARP,BOOTP, DHCP, DNS, HTTPs, IP, ICMP, SNTP, TCP, UDP, RADIUS, SNMP, STP (IEEE 802.1D)
- LED Indicators
- Power indicator
- 1 x LED,
- Green On: Power(PoE) is on and functioning Normally.
- 10/100Base-T(X) RJ45 port indicator
- 2 x LED,
- Green On: Port Link / Act, Blinking: data transmission
- WLAN LED
- 3 x LED,
- Green for WLAN Strength: 1<30%, 2<60%, 3<90%
- Power
- Input power
- 48VDC from P.o.E
- Power consumption (Typ.)
- 9 Watts
- Physical Characteristic
- Enclosure
- IP-67
- Dimension (W x D x H)
- 162(W)x 102(D)x 48(H) mm
- (6.38x 4.02x 1.89 inch.)
- Weight (g)
- 680 g
- Environmental
- Storage Temperature
- -30 to 85°C (-22 to 185°F)
- Operating Temperature
- -20 to 70°C (-4 to 158°F)
- Operating Humidity
- 100% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-32
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 3 years
Filterkriterien
- Zollnummer
- 85176200
- Status
- Archiviert
- Hersteller
- ORING