Deutsch
English
Beschreibung
The “Z” version is another milestone in the development of the thermocouple series and is a testament to the excellence of ICP DAS products. The ET-7018Z/PET-7018Z/ET-7218Z/PET-7218Z is specifically designed for extremely accurate thermocouple measurement and features automatic cold-junction compensation for each channel to ensure temperature output consistency and stable temperature output in the field. Current input and voltage input are both supported. Another feature is that its ten input channels can be individually configured for different kinds of analog input. Open thermocouple detection and ESD/EFT/Surge protection mechanisms are also included. The six/five digital output channels can be set as alarm outputs with short-circuit protection and overload protection.
● Built-in Web Server
● Web HMI
● Support for both Modbus TCP and Modbus UDP Protocols
● Communication Security
● 2-port Ethernet Switch for Daisy-Chain Topology
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C
● I/O Pair Connection
● Built-in I/O
● Thermocouple Input: 10 Channels
● DO: 6/3 Channels
Spezifikation
- Models
- ET-7018Z
- Software
- Built-In Web Server
- Yes
- Web HMI
- Yes
- I/O Pair Connection
- Yes
- Communication
- Ethernet Port
- 1 x RJ-45, 10/100 Base-TX
- PoE
- -
- Protocol
- Modbus TCP, Modbus UDP
- Security
- ID, Password and IP Filter
- Dual Watchdog
- Yes, Module (0.8 seconds), Communication (Programmable)
- LED Indicators
- for System Running
- Yes
- for Ethernet Link/Act
- Yes
- for DI/DO status
- -
- for PoE Power
- -
- 2 Way Isolation
- Ethernet
- 1500 VDC
- I/O
- 2500 VDC
- EMS Protection
- ESD (IEC 61000-4-2)
- 4 kV Contact for Each Terminal and 8 kV Air for Random Point
- EFT (IEC 61000-4-4)
- +/-4 kV for Power
- Power
- Reverse Polarity Protection
- Yes
- Powered from Terminal Block
- 10 ~ 30 VDC
- Powered from PoE
- -
- Consumption
- 2.0 W (Max.)
- Mechanical
- Dimensions (W x L x H)
- 72 mm x 123 mm x 35 mm
- Installation
- DIN-Rail or Wall mounting
- Environmental
- Operating Temperature
- -25 ~ +75 °C
- Storage Temperature
- -30~ +80 °C
- Humidity
- 10 ~ 90% RH, non-condensing
- Models
- ET-7018Z
- Thermocouple Input
- Channels
- 10 (Differential)
- Type
- +/-15 mV, +/-50 mV, +/-100 mV, +/-500 mV, +/-1 V, +/-2.5 V
- +/-20 mA, 0 ~ 20 mA, 4 ~ 20 mA
- (Requires Optional External 125 Ω Resistor)
- Thermocouple (J, K, T, E, R, S, B, N, C, L, M, and LDIN43710)
- Individual Channel Configuration
- Yes
- Resolution
- 16-bit
- Sampling Rate
- 10 Samples/Second (Total)
- Accuracy
- +/-0.1% of FSR or better
- Zero Drift
- +/-0.5 μV/°C
- Span Drift
- +/-25 ppm/°C
- Overvoltage Protection
- 240 Vrms
- Input Impedance
- >300 kΩ
- Common Mode Rejection
- 150 dB Min.
- Normal Mode Rejection
- 100 dB
- Temperature Output Consistency
- Yes
- Stable Temperature Output in the Field
- Yes
- Open Wire Detection
- Yes
- Virtual Channel to Channel Isolation
- +/-400 VDC
- Digital Output
- Channels
- 6
- Type
- Isolated Open Collector
- Sink/Source (NPN/PNP)
- Sink
- Max. Load Current
- 700 mA/Channel
- Load Voltage
- 5 VDC ~ 50 VDC
- Overvoltage Protection
- 60 VDC
- Overload Protection
- 1.4 A
- Short-circuit Protection
- Yes
- Power-on Value
- Yes, Programmable
- Safe Value
- Yes, Programmable
Filterkriterien
- Zollnummer
- 85176200
- Eingabe Protokoll
- ModbusTCP
- Analog In
- 10
- Digital Out
- 06
- Host-Schnittstelle
- Ethernet
- Status
- Standard
- Hersteller
- ICPDAS