I-7055-NPN-G CR

Beschreibung

8-channel Isolated Digital Input and 8-channel Isolated Digital Output Module

The I-7055 offers 8 isolated channels for digital input and 8 isolated channels for digital output. Either sink-type or source-type digital input can be selected via wire connections. All digital input channels are also able to be used as 16-bit counters. The I-7055 supports source-type output with short circuit protection.There are options to enable both power-on and safe values. The I-7055D has 16 LED indicators that can be used to monitor the status of the digital input and digital output channels. 4 kV ESD protection and 3750 VDC intra-module isolation are standard. The M-7055 has the same hardware specifi cations as the I-7055, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.

● I-7055(D)/M-7055(D)
● Source-type Digital Output Channels with Overload Protection
● I-7055(D)-NPN/M-7055(D)-NPN
● Sink-type Digital Output Channels with Overload Protection
● All Digital Input Channels can be used as 16-bit Counters
● Short Circuit Protection
● 4 kV ESD Protection
● 3750 VDC Intra-module Isolation
● Confi gurable Power-on Value Settings
● Confi gurable Safe Value Settings
● Wide Operating Temperature Range: -25 to +75°C

Spezifikation

Models: I-7055-NPN; M-7055-NPN
Digital Input/Counter
Channels: 8
Type
Dry Contact: Source
Wet Contact: Sink/Source
Wet Contact
On Voltage Level: +10 ~ 50 VDC
Off Voltage Level: +4 VDC Max.
Dry Contact
On Voltage Level: Close to GND
Off Voltage Level: Open
Effective Distance: 500 m Max.
for Dry Contact
Counters
Max. Count: 65535 (16-bit)
Max. Input: 100 Hz
Frequency
Min. Pulse Width: 5 ms
Input Impedance: 10 KΩ
Channel-to-Channel Isolation: -
Overvoltage Protection: ±70 VDC
Digital Output
Channels: 8
Type: Open Collector
Sink/Source (NPN/PNP): Sink
Load Voltage: +3.5 ~ 50 VDC
Max. Load Current: 700 mA/Channel
Overvoltage Protection: 60 VDC
Overload Protection: 1.4 A (with short-circuit protection)
Power-on Value: Yes
Safe Value: Yes
Models: I-7055-NPN; M-7055-NPN
Communication
Interface: RS-485
RS-485 Bias Resistor: No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format: N, 8, 1
Baud Rate: 1200 ~ 115200 bps
Protocol: DCON (for I-7055 series); Modbus RTU, DCON (for M-7055 series)
Dual Watchdog: Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicator/Display
System LED Indicator: Yes, 1 LED as Power/Communication Indicator
I/O LED Indicator: -
7-Segment LED Display: -
Isolation
Intra-Module Isolation, Field-to-Logic: 3750 VDC
EMS Protection
ESD (IEC 61000-4-2): ±4 kV Contact for each Terminal; ±8 kV Air for Random Point
EFT (IEC 61000-4-4): ±4 kV for Power Line
Surge (IEC 61000-4-5): ±3 kV for Power Line
Power
Reverse Polarity Protection: Yes
Input Range: 10 ~ 30 VDC
Consumption: 1.2 W
Mechanical
Dimensions (W x L x H): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall Mounting
Environment
Operating Temperature: -25 ~ +75°C
Storage Temperature: -40 ~ +85°C
Humidity: 10 ~ 95% RH, Non-condensing