Beschreibung
8-channel Isolated Digital Input Module
The I-7052 offers 6 fully independent channels and 2 common ground channels for digital input. The diffential inputs feature channel-to-channel Photocouple isolation. In addition, you can choose either sink- or source-type input via wire connections. All channels are able to be used as 16-bit counters. The I-7052D has 8 LED indicators for DI channel status monitoring. 4 kV ESD protection and 5000 Vrms intra-module isolation are standard. The M-7052 has the same hardware specifi cations as the I-7052, but provides additional support for the Modbus RTU protocol as well as the DCON protocol. The I-7053_FG features a long effective distance measurement for dry contact digital input of up to 500 meters. The I-7053_FG supports source-type input. All 16 channels are also able to be used as 16-bit counters, each of which are non-isolated. The I-7053D_FG has 16 LED indicators for channel status monitoring. The M-7053 has the same hardware specifi cations as the I-7053_FG, but provides additional support for the Modbus RTU protocol as well as the DCON protocol.
● I-7052(D)/M-7052(D)
● Differential Digital Inputs
● Sink- or Source-type Input
● 4 kV ESD Protection
● 5000 Vrms Isolation Voltage
● I-7053(D)_FG/M-7053(D)_FG
● 16 Source-type Digital Inputs
● Long Effective Distance
● Dry Contact Input
● Non-isolated for all Channels
● All Channels Can Be Used As 16-bit Counters
● Dual Watchdog
● Wide Operating Temperature Range: -25 to +75°C
Spezifikation
- Models
- I-7052
- I-7052D
- Digital Input/Counter
- Channels
- 8
- Type
- Dry Contact
- -
- Wet Contact
- Sink/Source
- Wet Contact
- On Voltage Level
- +4 ~ 30 VDC
- Off Voltage Level
- +1 VDC Max.
- Dry Contact
- On Voltage Level
- -
- Off Voltage Level
- -
- Effective Distance
- -
- for Dry Contact
- Counters
- Max. Count
- 65535 (16-bit)
- Max. Input Frequency
- 100 Hz
- Min. Pulse Width
- 5 ms
- Input Impedance
- 3 KΩ
- Channel-to-Channel Isolation
- Yes, ±2 kV for differential only.
- Overvoltage Protection
- ±35 VDC
- Models
- I-7052
- I-7052D
- Communication
- Interface
- RS-485
- Format
- (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
- Baud Rate
- 1200 ~ 115200 bps
- Protocol
- DCON
- Dual Watchdog
- Yes, Module (1.6 Seconds), Communication (Programmable)
- LED Indicator/Display
- System LED Indicator
- Yes, 1 LED as Power/Communication Indicator
- I/O LED Indicator
- -
- Yes, 8 LEDs as Digital Input Indicators
- 7-Segment LED Display
- -
- Isolation
- Intra-Module Isolation, Field-to-Logic
- 5000 Vrms
- EMS Protection
- ESD (IEC 61000-4-2)
- 4 kV Contact for each Terminal
- 8 kV Air for Random Point
- EFT (IEC 61000-4-4)
- ±4 kV for Power Line
- Surge (IEC 61000-4-5)
- -
- Power
- Reverse Polarity Protection
- Yes
- Input Range
- 10 ~ 30 VDC
- Consumption
- 0.2 W
- 0.6 W
- Mechanical
- Dimensions (W x L x H)
- 72 mm x 123 mm x 35 mm
- Installation
- DIN-Rail or Wall Mounting
- Environment
- Operating Temperature
- -25 ~ +75°C
- Storage Temperature
- -40 ~ +85°C
- Humidity
- 10 ~ 95% RH, Non-condensing
Filterkriterien
- Zollnummer
- 85176200
- Isoliert
- ja
- Digital In
- 08
- Eingabe Protokoll
- DCON
- Host-Schnittstelle
- Seriell
- Status
- Standard
- Hersteller
- ICPDAS