I-7050A-CR

Beschreibung

● 8 Digital Outputs and 7 Digital Inputs
● Open Collector Output
● Non-isolated for all Channels
● Digital Input Channels Can Be Used As 16-bit Counters
● Configurable Power-on Value Settings
● Configurable Safe Value Settings
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C

Spezifikation

Model: I-7050A
Digital Input/Counter
Channels: 7
Type
Dry Contact: Sink
Wet Contact: Source
Wet Contact
On Voltage Level: +4 ~ 30 VDC
Off Voltage Level: +1 VDC Max.
Dry Contact
On Voltage Level: -
Off Voltage Level: -
Effective Distance: -
for Dry Contact
Counters
Max. Count: 65535 (16-bit)
Max. Input: 100 Hz
Frequency
Min. Pulse Width: 5 ms
Input Impedance: 100 KΩ
Channel-to-Channel Isolation: -
Overvoltage Protection: -
Digital Output
Channels: 8
Type: Open Collector
Sink/Source (NPN/PNP): Source
Overvoltage Protection: +3.5 ~ 30 VDC
Max. Load Current: 50 mA/Channel
Overvoltage Protection: -
Overload Protection: -
Power-on Value: Yes
Safe Value: Yes
Model: I-7050A
Communication
Interface: RS-485
Bias Resistor: No (Usually supplied by the RS-485 Master. Alternatively, add a tM-SG4 or SG-785.)
Format: (N, 8, 1) (N, 8, 2) (E, 8, 1) (O, 8, 1)
Baud Rate: 1200 ~ 115200 bps
Protocol: DCON (For I-7050 series); Modbus RTU, DCON (For M-7050 series)
Dual Watchdog: Yes, Module (1.6 Seconds), Communication (Programmable)
LED Indicators/Display
System LED Indicator: Yes, 1 LED as Power/Communication Indicator
I/O LED Indicators: -
7-Segment LED Display: -
Isolation
Intra-Module Isolation, Field-to-Logic: -
EMS Protection
ESD (IEC 61000-4-2): -
EFT (IEC 61000-4-4): -
Surge (IEC 61000-4-5): -
Power
Reverse Polarity Protection: Yes
Input Range: 10 ~ 30 VDC
Consumption: 0.5 W; 0.4 W
Mechanical
Dimensions (W x L x H): 72 mm x 123 mm x 35 mm
Installation: DIN-Rail or Wall Mounting
Environment
Operating Temperature: -25 ~ +75°C
Storage Temperature: -40 ~ +85°C
Humidity: 10 ~ 95% RH, Non-condensing