FRAGEN SIE UNS

Beschreibung

Industrial 2-port bypass switch for fiber optical network with 4xLC duplex, single-mode, LC connector


IBS-102FX series are the external Bypass switches for 100M/1G/10G fiber optical networks. These fiber optical bypass switches protect the network from failures and subsequent maintenance by ensuring network integrity during power loss. Each of these fiber optical bypass switches includes Network ports and Monitor ports. The Network ports are used for connection to main-network connections and provide protection mechanism, and the Monitor ports are used for down-link local networking device. When the power is on, the operation mode of the Bypass switch is set to Normal, and the local networking device is connected with main-network. When power failure occurs, the Bypass switch is swiftly set to bypass mode to isolate the main-network from the local networking device.

• Support 100M/1G/10G optical bypass function of 2 port duplex or 4 ͑port simplex fiber connection
• Different models supported for multi-mode or single-mode optical ͑fiber
• Low insertions loss ͑
• Throughput not affected and no extra delay
• Bypass switching time < 10ms
• Dual wide-range power inputs: 12~48VD
• Relay output for power failure warning
• Rigid IP-30 housing design
• DIN-Rail/Wall-mount installation

 

IBS-102FX-MM-LC
Industrial 2-port bypass switch for fiber optical network with 4xLC duplex, multi-mode, LC connector
IBS-102FX-SS-LC
Industrial 2-port bypass switch for fiber optical network with 4xLC duplex, single-mode, LC connector

Spezifikation

Filterkriterien

Zollnummer
85176200
Ethernet
10G
Ports gesamt
02
Ports RJ45
00
Ports SFP
00
Ports Fiber
02
Management
unmanaged
Converter Typ
Sonstige
Status
Standard
Hersteller
ORING

Spezifikation

Physical Ports
LC connector
4 Duplex Single-mode LC connector
Fiber Ethernet
Optical Fiber
Single-mode: 9/125μm
Operating Wavelength
1260 ~ 1570 nm
Insert loss
typical1.2 dB , Maximun 1.6 dB
Switch time
< 10ms
DIP Switch Settings
DIP Swicth No.1
Power-1 failed warning detection – (On) relay enable (Off) relay disable
DIP Swicth No.2
Power-2 failed warning detection – (On) relay enable (Off) relay disabl
LED Indicators
Power Indicator
Green : Power LED x 2
Normal indicator
Green On : Operated in normal mode
Fault indicator
Amber : Indicates power failure occurred
Fault contact
Relay
Relay output for power failure warning
Power
Redundant Input Power
Dual 12~48 VDC power inputs at DC-Jack and 4-pin terminal block
Power Consumption (Typ.)
2.7 watts
Overload Current Protection
Present
Reverse Polarity Protection
Present on terminal block
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
26.1(W) x 94.9(D) x 144.3(H) mm (1.03 x 3.74 x 5.68 inch.)
Weight (g)
405 g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 70°C (-40 to 158°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A,
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
5 years

Zubehör

Klicken Sie hier, um Google Analytics zu deaktivieren.