FRAGEN SIE UNS
Beschreibung

Industrial Gigabit PoE Ethernet to fiber media converter with 1x10/100/1000Base-T(X) P.S.E. and 1x100/1000Base-X, SFP socket


The IGPMC-111GP is a cost-effective solution for the conversion interface between 10/100/1000Base-T(X) and 100/1000Base-X SFP socket; it allows you to extend communication distance by optical fiber. IGPMC-111GP supports MDI/MDIX auto detection, so you don’t need to use crossover wires. IGPMC-111GP also support Power over Ethernet, a system to transmit electrical power up to 30 watts, along with data, to remote devices over standard twisted-pair cable in an Ethernet network. Each IGPMC-111GP has 1x10/100/1000Base-T(X) P.S.E. (Power Sourcing Equipment) port to provide power in a PoE setup.


The IGPMC-111GP also supports the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then IGPMC-111GP will force the link to shut down as soon as noticed that the other link has failed, giving the application software a chance to react to the situation.


The IGPMC-111GP with wide operating temperature range from -40 ~ 75°C and accepts a wide voltage range from dual 50~57 VDC power inputs, so it is suitable for harsh operating environments. Therefore, the IGPMC-111GP is reliable media converter with PoE capability and can satisfy most demand of operating environment.

Spezifikation

Filterkriterien

Zollnummer
85176200
POE
P.S.E.
Converter Typ
Ethernet to Fiber
Status
Standard
Angebot
ja
Hersteller
ORING

Spezifikation

Physical Ports
10/100/1000 Base-T(X) P.S.E. Port in RJ45 Auto MDI/MDIX
1
100/1000Base-X SFP port
1
Technology
Ethernet Standards
IEEE 802.3i for 10Base-T
IEEE 802.3u for 100Base-TX and 100Base-FX
IEEE 802.3ab for 1000Base-T
IEEE 802.3z for 1000Base-X
IEEE 802.3at PoE specification (up to 30 Watts per port for P.S.E.)
Jumbo Frame
9K Bytes (1G mode only)
LED Indicators
Power / Ready Indicator
Green: Power LED x 2
LFP statue indicator
Amber LED – (ON) LFP function fail / (OFF) LFP function disable
100/1000Base-X SFP Port Indicator
Green for port Link/Act
10/100/1000Base-T(X) Port Duplex Mode Indicator
Green LED – (ON) Full-duplex mode / (OFF) Half-Duplex mode
10/100/1000Base-T(X) RJ45 port Indicator
Green for Link/Act
Dual color LED for speed – Green for 1000Mbps, Amber for 100Mbps, Off-light for 10Mbps
Fault Indicator (Fault)
Amber : Indicate unexpected event occurred
PoE indicator
Green: Power is supplied over Ethernet cable.
Fault Contact
Relay
Relay output to carry capacity of 1A at 24 VDC
Power
Input Power
Dual 50 ~ 57 VDC voltage power inputs in 4-pin terminal block
Power Consumption (Typ.)
4Watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristics
Enclosure
IP-30
Dimensions (W x D x H)
40 (W) x70 (D) x 95 (H) mm
Weight (g)
291g
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-40 to 75°C (40 to 167°F)
Operating Humidity
5% to 95% Non-condensing
Regulatory Approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-32
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
5 years
Klicken Sie hier, um Google Analytics zu deaktivieren.