tKINO-BW-N3-R20 (MOQ:200PCS)

Beschreibung

Thin Mini-ITX SBC supports 14nm Intel® Pentium®/Celeron® on-board SoC, 12V DC input, VGA/LVDS/DP+HDMI, SATA 6Gb/s, dual GbE, USB 3.0, HD Audio and RoHS

● Thin Mini-ITX form factor with 14nm Intel® Pentium®/Celeron® on-board SoC processor supports DDR3L memory
● Wide-range 12V~26V DC input
● Supports USB 3.0, two SATA 6Gb/s
● Triple independent display, supporting 4K resolution
● Supports IEI jumperless function

Spezifikation

SoC: Intel® Pentium® N3710 on-board SoC (up to 2.56GHz, quad-core, 2MB cache, TDP=6W); Intel® Celeron® N3160 on-board SoC (up to 2.24GHz, quad-core, 2MB cache, TDP=6W); Intel® Celeron® N3060 on-board SoC (up to 2.48GHz, dual-core, 2MB cache, TDP=6W); Intel® Celeron® N3010 on-board SoC (up to 2.24GHz, dual-core, 2MB cache, TDP=4W)
BIOS: UEFI BIOS
Memory: Two 204-pin 1333/1600 MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slots support up to 8 GB
Graphics: Intel® HD Graphics Gen 8 Engines with 16 low-power execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Display Output: Triple independent display; 1 x HDMI/DP (up to 3840x2160@30Hz); 1 x 18/24-bit dual-channel LVDS by CH7511B DP to LVDS converter (up to 1920x1200@60Hz); 1 x VGA by CH7517 DP to VGA converter (up to 1920x1200@60Hz)
Ethernet: Dual Realtek RTL8111E PCIe GbE controller
External I/O Interfaces: 2 x USB 3.0; 2 x USB 2.0
Internal I/O Interfaces: 4 x RS-232 (2x5 pin, P=2.0); 2 x RS-232/422/485 (2x5 pin, P=2.0); 2 x SATA 6Gb/s with 5V output; 1 x mSATA colay SATA2; 1 x KB/MS (1x6 pin); 2 x USB 2.0 (2x4 pin, P=2.54)
Front Panel: 1 x Front panel (2x7 pin, power LED, HDD LED, speaker, power button, reset button)
LAN LED: 2 x LAN LED (1x2 pin)
SMBus: 1 x SMBus (1x4 pin)
TPM: 1 x TPM connector (2x10 pin)
I²C: 1 x I²C (1x4 pin)
Digital I/O: 1 x 8-bit digital I/O (2x5 pin)
Expansion: 1 x Full-size PCIe Mini card slot; 1 x microSD card slot; 1 x PCIe x1
Audio: Realtek ALC662 HD codec; 1 x Audio jack (line-out); 1 x Analog audio (2x5 pin)
Watchdog Timer: Software programmable supports 1~255 sec. system reset
Power Supply: 12V only DC input; 1 x External DC power jack (ø5.5 mm); 1 x Internal power connector (2x2 pin); Support AT/ATX mode
Fan Connector: 1 x CPU smart fan (1x4 pin); 1 x System smart fan (1x4 pin)
Power Consumption: [email protected] (Intel® Celeron® N3060 CPU with 4 GB 1600 MHz DDR3L memory)
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Operating Humidity: 5% ~ 95%, non-condensing
Weight: GW: 900g/NW: 400g