IMB-H610A-R10

Beschreibung

microATX Motherboard Supports LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® CPU with Intel® H61, DDR3, VGA/DVI-D, Dual Realtek PCIe GbE, USB 2.0, Six COMs, SATA 3Gb/s, HD Audio and RoHS

● LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor supported
● Up to 16 GB 1333 MHz dual-channel DDR3 SDRAM
● Intel® HD Graphics technology integrates high-performance graphics and media processing
● TPM V1.2 hardware security provided by the TPM module
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Spezifikation

CPU: LGA1155 socket supports Intel® Core™ i7/i5/i3 quad/ dual, Pentium® dual and Celeron® dual/single core processors
System Chipset: Intel® H61
BIOS: UEFI BIOS
System Memory: Two 240-pin 1333/1066 MHz dual-channel unbuffered DDR3 SDRAM DIMMs supported (system max. 16GB)
Ethernet: LAN1: Realtek RTL8111E PCIe GbE controller with ASF 2.0 support; LAN2: Realtek RTL8111E PCIe GbE controller
I/O Interface: 1 x PS/2 KB/MS; 1 x RS-422/485; 5 x RS-232; 4 x SATA 3Gb/s without RAID & AHCI; 10 x USB 2.0 (4 by rear IO, 6 by pin header)
Digital I/O: 8-bit programmable I/O
Super I/O: Fintek F81866
TPM: 1 x TPM connector (2x10 pin)
SMBus: 1 x 4-pin wafer
Audio: Realtek ALC662 HD audio codec (Line-in, Line-out, Mic)
Display Interfaces: Dual display supported; 1 x VGA (up to 2048 x 1536 @75Hz); 1 x DVI-D (up to 1920 x 1200 @60Hz)
Expansion: 1 x PCIe x16 slot; 3 x PCIe x1 slot
Watchdog Timer: Software programmable supports 1~255 sec. system reset
Power Supply: ATX/AT power supply
Power Consumption: [email protected], [email protected] , [email protected], [email protected], [email protected] (Intel® 2.60GHz CPU with two 1333MHz 4GB DDR3 memory)
Graphic: Intel® HD Graphics 2000/3000 (based on CPU type); Support for DX10.1 and OpenGL 3.0; Full MPEG2, VC1, AVC Decode
Operating Temperature: -10°C ~ 60°C
Storage Temperature: -20°C ~ 70°C
Humidity: 5% ~ 95%, non-condensing
Dimensions: 244mm x 244mm
Weight: GW: 1200g / NW: 680g
Front Panel: 1 x Front panel connector (power LED, HDD LED, speaker, power button, reset button)
I2C: 1 x 4-pin wafer
Front Audio: 1 x 10-pin header
Fan Connector: 1 x 4-pin CPU fan connector; 2 x 3-pin system fan connector