FRAGEN SIE UNS
Beschreibung

Pico-ITX SBC with Intel® 14nm Pentium®/Celeron® on-board SoC with dual Micro HDMI, M.2, GbE, USB 3.0, SATA 6 HYPER-BW Gb/s, COM, Audio and RoHS


● Pico-ITX SBC supports Intel® 14nm Pentium®/Celeron® on-board SoC
● IEI jumper-less function
● Dual independent display support
● 1333/1600 MHz 1.35V DDR3L SDRAM up to 8 GB supported
● COM, USB 3.0, SATA 6Gb/s and Audio support
● 1 x M.2 B key slot for expansion possibility
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Spezifikation

Filterkriterien

Zollnummer
84715000
Applikationen
Geräte- und Automatenherstellung
Technologien
Intel Braswell
Formfaktor
Pico-ITX
Sockel
(mit Prozessor)
Prozessor
Celeron
Taktfrequenz
2.48GHz
Status
Standard
Hersteller
IEI

Spezifikation

SoC
Intel® Pentium® N3710 on-board SoC (up to 2.56GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3160 on-board SoC (up to 2.24GHz, quad-core, 2MB cache, TDP=6W)
Intel® Celeron® N3060 on-board SoC (up to 2.48GHz, dual-core, 2MB cache, TDP=6W)
Intel® Celeron® N3010 on-board SoC (up to 2.24GHz, dual-core, 2MB cache, TDP=4W)
BIOS
AMI UEFI BIOS
Memory
One 204-pin 1333/1600 MHz single-channel DDR3L SDRAM unbuffered SO-DIMM slot support up to 8 GB
Graphics Engine
Intel® HD Graphics Gen 8 Engine with 16 low-power execution units, supporting DX 11.1, OpenGL 4.2 and OpenCL1.2
Display Output
Dual independent display
2 x Micro HDMI (up to 3840x2160@30Hz)
Ethernet
LAN1: Realtek RTL8111 controller
External I/O Interface
1 x USB 2.0
1 x USB 3.0
Internal I/O Interface
1 x RS-232 (1x9 pin, P=1.25)
1 x SATA 6G/s with 5V SATA power connector (No RAID) (SATA port0)
2 x USB 2.0 (2x4 pin, P=2.0)
Audio
1 x HD Audio (2x5 pin)
Front Panel
1 x Front panel (1x10 pin, power LED, HDD LED, power buttom, reset buttom)
LAN LED
1 x LAN LED (1x2 pin)
Expansion
1 x M.2 (B Key)
Fan Connector
1 x Smart fan connector (1x4 pin)
Power Supply
12V DC input only
1 x Power terminal block (1x2 pin)
Support AT/ATX mode
Power Consumption
12V@1.52A (Intel® Pentium® processor N3710 with 8 GB 1600 MHz DDR3L memory)
Watchdog Timer
Software programmable supports 1~255 sec. system reset
Operating Temperature
-20°C ~ 60°C
Storage Temperature
-30°C ~ 70°C
Operating Humidity
5% ~ 95%, non-condensing
Vibration
3G
Dimensions
100mm x 72mm
Weight
GW:30g / NW:250g
Packliste
  • 1 x HYPER-BW single board computer
  • 1 x Audio cable
  • 1 x Power cable
  • 1 x RS-232 cable
  • 2 x SATA with power cable kit
  • 1 x One Key Recovery CD
  • 1 x QIG (Quick Installation Guide)
  • 1 x Utility CD
Zubehör
Alternativen