News

Low-cost LTE router for M2M/IoT applications.

With the UR32L, ICP Germany expands its portfolio with a low-cost industrial cellular router variant. With its embedded intelligent functions, the UR32L has been designed for diverse M2M/IoT applications. Support for global WCDMA and 4G LTE operators facilitates installation around the globe.

The UR32L is equipped with an NXP single core ARM Cortex-A7 with 528MHz clock frequency.128MB DDR3 RAM and 128MB Flash memory are installed as standard. Furthermore, the UR32L offers two 10/100 Mbps network interfaces, which can be used as 1xWAN+1xLAN or 2xLAN. Another variant of the UR32L is equipped with Power over Ethernet functionality. For security, features like VPN, IPsec, automated failover and fallback, SPI firewall and many more can be set up.

The integration of watchdog and multi-link failover detection further ensures stable communication. The IP30 metal case size 108x90x26mm can be easily mounted on a DIN rail or...

DDR5 DRAM modules for industrial computer systems.

Especially for mainboards used in industrial PCs, ICP Germany offers DDR5 DIMM modules, which are designed for tougher applications and can meet higher requirements than standard RAM. All modules are designed and manufactured according to JEDEC standard. Original DRAM chips in industrial quality are used. To meet higher requirements, all RAM modules are subordinated to the principle of a fixed production bill of materials (Fixed-BOM) and use only components that are available on a long-term basis.

The 288 PIN standard DIMM and the 262 PIN standard SO-DIMM...

Embedded board with Tripple 2.5G network interface.

With the WAFER-JL, ICP-Germany is expanding its portfolio in the area of embedded boards.

The WAFER-JL is a 3.5" mainboard that is equipped with a cooling shell. The cooling shell enables a very simple installation of the board as well as an uncomplicated heat dissipation of the installed components, which is an advantage for vending machine manufacturers or machine builders.

The 3.5" embedded board is equipped with a Jasper Lake...

More performance, more connectivity and simplified configuration.

Up to 30% performance increase when using an Intel® CoreTM i5, more connectivity through triple Ethernet ports and a simplified configuration through the new tBIOS. Three advantages of the KINO-DH420 from ICP Germany.

The mini-ITX board KINO-DH420 supports the 10th generation Intel® CoreTM I processors with a thermal design power of up to 65 watts. Comparing the ninth to the 10th generation Intel® CoreTM i5, this results in a performance increase of 30%. With the corresponding Intel® CoreTM i7 it is 28% increase and in the top CPU segment with Intel® CoreTM i9 still 21% more performance. The KINO-DH420 supports up to 64GB of DDR4 SODIMM RAM at 2933MHz in dual-channel mode on its two RAM sockets. Connectivity has not been spared. Three 2.5GbE network interfaces provide ample connectivity to various networks and devices. The 2.5x increase in speed minimizes the bottleneck in network connections. The board also offers four USB3...

High-performance and multitasking full-size PICMG1.3 slot CPU card.

PICMG1.3 Slot CPU cards from ICP Germany offer design flexibility and a wide range of system combinations.

With the latest PCIE-Q470 slot CPU card, ICP Germany is expanding its portfolio with a high-performance and multitasking-capable variant that can be equipped with Intel® Core-I processors of the 10th or 11th generation. The PCIE-Q470 supports all Core-I, Celeron® or Pentium® processors with up to 65 Watt thermal design power. Depending on the CPU choice, up to 10 CPU cores and 20 threads are available for multitasking applications. Up to 128GB DDR4 memory can be used in dual-channel mode with up to 2933 MHz. The Intel® UHD graphics unit delivers a resolution of up to 4096x2160 pixels at 30 Hz on the HDMI 1.4 port. The two Intel® I225V network ports are capable of delivering network speeds of 2.5Gb.

Furthermore, the PCIE-Q470 offers four USB3.2 Gen1 (5Gb/s), one USB3.2 Gen2 (10Gb/s) with USB Type C connector, one...

Half-Size PICMG1.3 SBC Card for Compact Industrial PC Systems.

High-performance and compact industrial computer systems can be realized with the new PICMG1.3 half-size slot CPU card from ICP Germany. In contrast to its full-size counterpart PCIE-Q470, the HPCIE has a size of only 169x126 mm.

The HPCIE-Q470 supports all Core-I, Celeron® or Pentium® processors with up to 65 Watt Thermal Design Power. Thus, depending on the processor used, up to 10 CPU cores and 20 threads are available for multitasking applications. The HPCIE is also equipped with two DDR4 RAM sockets and can manage up to 64GB of RAM in dual-channel mode at up to 2933 MHz. The Intel® UHD graphics unit offers a resolution of up to 4096x2160 pixels at 30 Hz on the HDMI 1.4 port. Two Intel® I225V network ports provide network speeds of 2.5Gb.

In addition, the HPCIE-Q470 offers two USB3.2 Gen1 (5Gb/s), one USB3.2 Gen2 (10Gb/s) with USB Type C connector, two USB2.0, two RS-232/422/485 serial ports, twelve digital EAs, SMBus, I²C, and an audio header for the Audio Kit expansion module. The PCI Express lanes on the HPCIE-Q470 allow for x16, x8+x8 or x8+x4+x4 operating modes...

Hardware in the IT sector is a complex topic, as the products on the global market involve many poorly regulated components and manufacturing processes. Therefore, it is particularly important for ICP Germany as a provider of industrial computer products to drive its GREEN IT strategy with reduced hardware footprints. With an energy- and resource-saving operation of IT systems and the associated potential for cost savings for ICP customers.

Tablet PC for "almost" any place - Whether cornfield, in the office or in the vehicle.

The use of tablet PCs is particularly recommended for mobile applications when it is necessary to read data, receive instructions, visualize or operate and set up devices. With the ND62, ICP Germany has a tablet PC that is designed for a wide range of mobile applications.

The ND62 is IP65 protected, has a size of 283x192x15 mm (WHT), is certified according to MIL standard 810G and withstands a drop from a height of 1.5 meters. The ND62 is equipped with an Intel® Celeron® N4120 processor, which features four processor cores with a base clock of 1.1GHz and a turbo clock of 2.6GHz. 4GB of DDR4 RAM is pre-installed and can be expanded to 8GB if desired.

The 10.1" inch display in 16:10 format delivers a resolution of 1920x1200 and is suitable for use in direct sunlight with 800 cm/m². The 10 point multi touch supports two finger operation with gloves as well as operation with wet fingers. Also available are a front-facing 2MP camera, a rear-facing 8MP camera, a USB3.1 Type A...

Entry level panel PC series in wide screen format.

The new Panel PC series PPC-JWS-J4125 from ICP Germany offers a good entry into the world of visualization. The PPC-JWS series is available in standard wide-screen formats of 7", 10.1", 11.6",15.6", 17.3", 19.1" and 21.5" inches. All systems are equipped with 10 finger PCAP (projected capacitive) touch screen. The touch screen is set to allow two finger gloved operation.

The new Panel PC series is equipped with the Intel® Celeron® J4125. This operates on its four CPU cores with a base clock rate of 2.0GHz and offers sufficient computing power with a maximum burst frequency of 2.7Ghz. The UHD graphics unit supports OpenGL 4.4, DirectX 12, Intel® Quick Sync video and a maximum burst frequency of 750MHz. The 11.6", 15.6", 17.3 and 21.5" sizes offer a resolution of 1920x1080, whereas the 7" model offers 1024x600, the 10.1" 1280x800 and the 19.1" model 1440x900.

All models are equipped with 8GB DDR4 memory, 128GB mSATA SSD and come with Windows 10 IoT Enterprise pre-installed. The panel PCs also offer...

Comet Lake Micro-ATX motherboard for industrial use

ICP Germany offers with the PH10CMU a Micro-ATX board, which is available in four variants. One variant in the entry-level class with Intel® H420E chipset, two variants from the desktop class with Q470E chipset and one variant from the workstation class with W480E chipset.

Common to all is the support of the 10th generation Core-i9/i7/i5/i3 with up to 10 processor cores and 125 Watt thermal design power. Up to 64GB of RAM with a maximum clock rate of 2933 MHz can be loaded on the four DDR4 memory banks, whereby the W480E variant supports ECC error correction. The Intel HD graphics unit enables the connection of three monitors with a resolution of max. 4K on the HDMI and display port, as well as Full HD on the DVI port with the triple display support. Furthermore, two network ports with Intel i219LM and i210AT ICs are available. The Micro-ATX boards offer one PCI Express 3.0 x16 slot, one PCI Express 2.0 x8 slot, one M.2 2242/2260/2280, one M.2 2230 and one PCI slot as expansion options.

Differences between the variants can be seen in the...