DRPC-130-AL – Fanless DIN-Rail Embedded PC

Neuigkeiten bei ICP Deutschland GmbH - Offizieller Partner von IEI
DRPC-130-AL – Fanless DIN-Rail Embedded PC

Yes, we CAN!


The new fanless DIN-Rail Embedded PC DRPC-130-AL from ICP Germany is compact and optimized for control cabinet installation.

The new edition of the DRPC convinces with numerous new functions. These include two isolated CAN buses, which are lead out via a DB-9 connector, an optional TPM module and a PS-ON terminal block. The advantages for industrial control and automation are obvious: secure data transmission in real time and usage in places that are difficult to access because direct access for operation is not necessarily required.

Four USB, two GbE, four RS-232/422/485, one 8-bit digital I/O and one DB-9 connector for Dual CAN are available at the front of the IP40 protected housing. The two HDMI 1.4b interfaces offer a resolution of up to 4K UHD and, like the two terminal blocks, are easily accessible from above. One terminal block supplies the DRPC-130-AL with an input voltage of 12V~24VDC. The other (PS-ON) allows the DIN-Rail Embedded PC to be switched on and off externally. A 2.5" SATA 6Gb/s drive bay, an mSATA and an eMMC 5.0 slot can easily be equipped with suitable mass storage via the removable side panel.

Inside the 174x130x59mm compact DRPC-130-AL is a current 14nm Intel® AtomTM dual-core processor and max. 8GB DDR3L memory. An integrated SIM slot and a WLAN module can optionally be used for remote control within the network. Thanks to an operating temperature of -20°C ~60°C and its vibration resistance, the DRPC-130-AL is particularly robust and can be used for a wide range of applications.

Upon customer request, ICP delivers the DRPC-130-AL preassembled and with integrated operating system as Ready-to-Use system.


Specifications

  • ● DIN-Rail PC with Intel® AtomTM x5-E3930 SoC
  • ● Max. 8GB DDR3L SO-DIMM memory
  • ● One 2.5“SATA 6Gb/s SDD drive bay
  • ● Dual PCIe Mini slot
  • ● USB, COM, digital I/O ports & Dual CAN bus
  • ● Dual HDMI 1.4b
  • ● Power input: 12V~24VDC
  • ● Operating temperature: -20°C~60°C
  • ● Integrated SIM slot, WLAN & TPM module (optional)


Applications

  • ● Automation
  • ● Industrial Control
  • ● Monitoring
  • ● Datalogger