KINO-EHL-J6412C-R10

Description

Mini-ITX SBC supports Intel® Elkhart Lake Celeron® on-board SoC with Triple Independent Display, HDMI, DP,IDPM, SATA 6Gb/s, Dual 2.5GbE, USB 3.2, M.2, 12V DC input and RoHS

● 10W Low-power Intel® Elkhart Lake Celeron® J6412 CPU
Intel® 10nm Celeron® J6412 On-board SoC, 4 cores and 4 threads, base frequency 2.00GHz, turbo frequency up to 2.60GHz, 1.5MB cache
● Supporting Intel® I225V 2.5GbE Controllers
Two RJ45 network interfaces are supported via Intel® I225V 2.5GbE controllers, achieving up to 2.5GbE network transmission rate.
● Rich Expansion I/O
Support one M.2 A key for Wi-Fi & Bluetooth modules, one M.2 B key 3042 for 5G modules and one openended PCIe Gen3 x4 slot.
● IEI-specific IDPM Interface
IEI uniquely designs a IDPM interface that can connect to display modules, enabling users to add LVDS/eDP/VGA display interface upon requirements.

Specification

CPU: Intel® Elkhart Lake Processor; Intel® Celeron® J6412 on-board SoC (up to 2.6GHz, quad-core, 1.5M Cache, TDP=10W)
BIOS: AMI UEFI BIOS; Dual BIOS for boot & recovery
Memory: Onboard LPDDR4x-3200MHz 4GB, system up to 8GB
GraphicsEngine: Gen11LP Gfx firmware and driver, Media SDK, OpenCL* 1.2, OpenGL 4.5, OpenGL-ES 3.2, Vulkan v1.1, DirectX
DisplayOutput: Triple Independent Display; 1 x HDMI 1.4 (up to 4096 x 2160@30Hz); 1 x DP 1.4 (up to 4096 x 2160 @60Hz); 1 x IEI IDPM 3040 slot (only for IEI eDP/LVDS/VGA module)
Ethernet: LAN1: Intel® I225V 2.5GbE controller; LAN2: Intel® I225V 2.5GbE controller
ExternalI/OInterface: 2 x USB 3.2 Gen 2 (10Gb/s) (USB Type A); 2 x USB 2.0 (USB Type A); 2 x RS-232
InternalI/OInterface: 1 x SATA 6Gb/s; 4 x USB 2.0 (2x4 pin, P=2.0); 4 X RS-422/485 (pin header)
SMBus: 1 x SMBus (1x4 pin)
I2C: 1 x I2C (1x4 pin)
Audio: 1 x IAUDIO, support IEI AC-KIT-888S Audio Module (2x5 pin, P=2.0)
FrontPanel: 1 x Front Panel (2x7 pin, power LED, HDD LED,power button, reset button)
LANLED: 2 x LAN LED (1x2 pin)
Expansion: 1 x PCIe x4 slot, open-ended (PCIe Gen3 x1 signal); 1 x M.2 A key (2230) (PCIe x 1 & USB 2.0); 1 x M.2 B key (3052/3042/2242/2280) w/ SIM holder (PCIe x2 USB 2.0)
DigitalI/O: 1 x 12-bit DIO (2x7 pin)
TPM: Intel® PTT(TPM 2.0)
FanConnector: 1 x CPU fan connector (1x4 pin); 1 x System fan connector (1x3 pin)
PowerSupply: 12V DC input; 1 x Internal power connector (2x2 pin); 1 x External DC power jack (Ø5.5mm); ErP/EuP Compliant
WatchdogTimer: Software programmable, support 1~255 sec. system reset
PowerConsumption: TBD
OperatingTemperature: 0°C ~ 60°C
StorageTemperature: -30°C ~ 70°C
OperatingHumidity: 5% ~95%, non-condensing
Dimension: 170 mm x 170 mm
Weight: GW:900g / NW:400g
Certification: CE/FCC Compliant