KINO-ABT-i2-N29301-R10

Description

Mini-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC, VGA/HDMI/iDP, Dual Intel® PCIe GbE, USB 3.0, SATA, HD Audio, iRIS-2400 and RoHS

● Mini-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
● 1066/1333 MHz 1.35V DDR3L SDRAM supported up to 8GB
● Supports dual independent display with VGA, HDMI and iDP
● COM, USB 3.0, SATA, PCIe Mini, mSATA and HD Audio support
● Supports IPMI 2.0 via iRIS-2400 module
● Supports Intel® VT-x technology
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specification

CPU: Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W)
BIOS: AMI UEFI BIOS
System Memory: Two 204-pin 1066/1333MHz dual-channel DDR3L SO-DIMM support up to 8 GB (J1900, N2930, E3845, E3827, E3826) or 4 GB (N2807, E3825, E3815)
Ethernet: LAN1: Intel® I210-AT PCIe controller with NCSI support (for iRIS solution); LAN2: Intel® I211-AT PCIe controller
I/O Interface: 1 x PS/2 KB/MS; 1 x microSD slot (E38XX SKU only); 2 x USB 3.0 (on rear I/O); 6 x USB 2.0 (2 on rear I/O, 4 by pin header); 1 x RS-422/485 (by pin header); 5 x RS-232 (2 on rear I/O, 3 by pin header); 2 x SATA 3Gb/s with 5V SATA power connector (no RAID)
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: Fintek F81866D-I
TPM: 1 x TPM connector (2x10 pin)
SMBus: 1 x 4-pin (1x4) wafer
Audio: Realtek ALC662 HD codec supports 5.1 channel
Display Interfaces: Dual Independent Display; VGA (up to 2560x1600@60Hz); HDMI (up to 2560x1600@60Hz); iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Expansion: 1 x Full-size PCIe Mini card slot (supports mSATA, co-lay SATA port 2); 1 x PCIe x4 slot (PCIe x1 signal)
Watchdog Timer: Software programmable, supports 1~255 sec. system reset
Power Supply: ATX power supply
Power Consumption: [email protected], [email protected], [email protected], [email protected] (Intel® Celeron® J1900 CPU, 2 x 4GB 1333 MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Humidity: 5% ~95%, non-condensing
Dimensions: 170mm x 170mm
Weight: 900g/NW: 450g
Front Panel: 1 x 6-pin (1x10) wafer for power LED & HDD LED; 1 x 2-pin (1x2) wafer for power button; 1 x 2-pin (1x2) wafer for power reset
I2C: 1 x 4-pin (1x4) wafer
Fan Connector: 1 x 4-pin smart fan connector; 1 x 4-pin system fan connector
iRIS Remote Management Module: 1 x iRIS-2400 slot
LAN LED: 2 x 2-pin (1x2) header