EKINO-BT-J19001-R10

Description

Mini-ITX SBC supports AUPS Sub-System, Intel® 22nm Atom™/Celeron® on-board SoC, Wide-range 9V ~ 26V DC input, VGA/ Dual LVDS, SATA, Dual GbE, USB 3.0, Audio, CFast and RoHS

● Mini ITX supports Intel® 22nm Atom™ or Celeron® on-board SoC
● Wide-range 9V ~ 26V DC input design
● Supports dual independent display with dual LVDS and VGA
● Equipped with AUPS sub-system, acts as a simple UPS system
● Supports four USB 2.0, two USB 3.0, two SATA and four COM
● IEI jumper-less function

Specification

CPU: Intel® Atom™ E3845 on-board SoC; (1.91GHz, quad-core, 2MB cache, TDP=10W); Intel® Atom™ E3827 on-board SoC; (1.75GHz, dual-core, 1MB cache, TDP=8W); Intel® Atom™ E3826 on-board SoC; (1.46GHz, dual-core, 1MB cache, TDP=7W); Intel® Atom™ E3825 on-board SoC; (1.33GHz, dual-core, 1MB cache, TDP=6W); Intel® Atom™ E3815 on-board SoC; (1.46GHz, single-core, 512KB cache, TDP=5W); Intel® Celeron® J1900 on-board SoC; (2GHz, quad-core, 2MB cache, TDP=10W); Intel® Celeron® N2930 on-board SoC; (1.83GHz, quad-core, 2MB cache, TDP=7.5W); Intel® Celeron® N2807 on-board SoC; (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS: AMI UEFI BIOS
System Memory: Two 204-pin 1066/1333MHz dual-channel unbuffered DDR3L SDRAM SO-DIMM supports up to 8 GB (J1900, N2930, E3845, E3827, E3826) or 4 GB (N2807, E3825, E3815)
Ethernet: Dual LAN: Realtek RTL8111E PCIe controller
I/O Interface: 4 x RS-232; 1 x RS-422/485; 1 x CFast slot; 2 x SATA with 5V output; 4 x USB 2.0 (2 on rear IO, 2 by pin header); 2 x USB 3.0 (rear IO); 1 x 6-pin header for KB/MS
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: F81866D-I
TPM: 1 x TPM connector (2x10 pin)
SMBus: 1 x 4-pin wafer
Audio: Realtek ALC662 HD codec; 2 x Audio jacks (rear I/O); Front audio: 1 x 10-pin header
Expansion: 1 x Full-size PCIe Mini card slot (with USB 2.0); 1 x PCIe x1
Watchdog Timer: Software programmable supports 1~255 sec. system reset by super I/O
Power Supply: Input voltage range: 9V~27V; Recommended operating input voltage range: 12V~24V; 1 x External 4-pin DIN DC jack; 1 x Internal 4-pin (2x2) power connector
Fan: 1 x 4-pin smart fan; 1 x 3-pin system fan
Power Consumption: +12V @1.55A (Intel® Celeron® J1900 CPU, 2 x 4GB 1333 MHz DDR3L memory)
Graphic: Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature: 0°C ~ 40°C with AUPS sub-system; -20°C ~ 60°C without AUPS sub-system
Storage Temperature: -10°C ~ 50°C with AUPS sub-system; -30°C ~ 70°C without AUPS sub-system
Humidity: 5% ~ 95%, non-condensing
Weight: GW: 1100g/NW: 400g