HYPER-BT-E38271-R10 (MOQ:100PCS)

Description

PICO-ITX SBC supports Intel® 22nm Atom™/Celeron® on-board SoC, DDR3L, VGA/iDP, GbE, USB 3.0, SATA 3Gb/s, HD Audio and RoHS

● PICO-ITX SBC supports Intel® 22nm Atom™ or Celeron® on-board SoC
● 12V only single voltage design for AT/ATX power by DC power jack
● VGA and iDP support dual display
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specification

CPU: Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W); Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W); Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W); Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W); Intel® Atom™ E3815 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=5W); Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W); Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W); Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS: AMI UEFI BIOS
System Memory: One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Ethernet: LAN: Intel® I211-AT PCIe controller
I/O Interface: 2 x RS-232 (by pin header); 1 x SATA 3Gb/s with 5V SATA power connector; 1 x USB 3.0 (on rear I/O); 3 x USB 2.0 (1 on rear I/O, 2 by pin header)
Super I/O: Fintek F81866
Audio: Realtek ALC662 HD codec supports 5.1 channel
Display Interfaces: Dual independent display; 1 x VGA (up to 2560x1600@60Hz); 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Watchdog Timer: Software programmable, support 1~255 sec. system reset
Power Supply: 12V DC power input only, AT/ATX supported; 1 x External DC power jack
Power Consumption: [email protected] (Intel® Celeron® J1900 CPU, 1 x 4GB 1333 MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 7 Engines with 4 execution units, supporting DX11.1 OpenGL 4.2 and OpenCL 1.2
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Humidity: 5% ~ 95%, non-condensing
Dimensions: Single board: 100mm x 72mm; Heat spreader: 112mm x 78mm
Weight: GW:600g / NW:250g
Front Panel: 1 x 6-pin (1x6) wafer for power LED & HDD LED; 1 x 2-pin (1x2) wafer for power button; 1 x 2-pin (1x2) wafer for power reset button
Fan Connector: 1 x 4-pin system fan connector
LAN LED: 1 x 2-pin (1x2) header