NANO-AL-E2W2-R10 (MOQ:100PCS)

Description

EPIC SBC supports Intel® 14nm Generation Atom™ or Celeron® on-board SoC with Dual HDMI/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, M.2, SATA 6Gb/s, COM, Audio and RoHS, -40°C ~ 85°C

● EPIC SBC supports Intel® 14nm Generation Atom™, Celeron® or Petium® on-board SoC supports dual-channel DDR3L SO-DIMMs
● Triple independent display support
● Wide range 9V~30V DC input design
● COM, USB 3.0, SATA 6Gb/s, M.2 and audio support
● Support wide temperature operation: -40°C ~ 85°C

Specification

SoC: Intel® Atom™ E3950 on-board SoC (up to 2.0GHz, quad-core, 2M Cache, TDP=12W); Intel® Atom™ E3940 on-board SoC (up to 1.8GHz, quad-core, 2M Cache, TDP=9W); Intel® Atom™ E3930 on-board SoC (up to 1.8GHz, dual-core, 2M Cache, TDP=6W); Intel® Pentium® N4200 on-board SoC (up to 2.5GHz, quad-core, 2M Cache, TDP=6W); Intel® Celeron® N3350 on-board SoC (up to 2.4GHz, dual-core, 2M Cache, TDP=6W)
BIOS: AMI UEFI BIOS
Memory: One 204-pin 1866/1600MHz Dual-channel DDR3L DIMMs support up to 8GB
Graphics Engine: Intel® HD Graphics Gen9 Low Power, 18 Execution Units; 4K Codec Decode & Encode for HEVC 4 , H.264, VP8, SVC, MVC
Display Output: Triple Independent Displays; 1 x LVDS: 18/24-bit dual-channel LVDS (up to 1920x1200@60Hz); 2 x HDMI (up to 3840x2160 @ 30Hz); 1 x iDP interface for HDMI. LVDS, VGA, DVI, DP (up to 4096 x 2304 @60Hz) (colay with HDMI1)
Ethernet: Intel® I211-AT PCIe controller
External I/O Interface: 2 x USB 3.0; 2 x USB 2.0
Internal I/O Interface: 1 x KB/MS (1x6 pin); 2 x USB 2.0 (2x4 pin, P=2.0); 2 x RS-232/422/485 (2x5 pin, P=2.0); 4 x RS-232 (2x5 pin, P=2.0); 2 x SATA 6G/s with 5V SATA power connector (no RAID)
SMBus: 1 x SMBus (1x4 pin)
I²C: 1 x I²C (1x4 pin)
Audio: Realtek ALC662 HD codec; 2 x Audio Jacks (Co-lay 3 Jacks type) (Mic-in, Line-out); 1 x Analog audio (2x5 pin)
Front Panel: 1 x Power LED & HDD LED (1x6 pin); 1 x Power button (1x2 pin); 1 x Reset button (1x2 pin)
LAN LED: 2 x LAN LED (1x2 pin)
Expansion: 1 x Full/Half-size PCIe Mini slot (w/ Micro SIM holder); 1 x M.2 2242 (B key,SATA, USB2.0, USB3.0 signal only); 1 x Micro SD (Optional)
Digital I/O: 1 x 8-bit digital I/O (2x5 pin)
Fan Connector: 1 x Smart fan connector (1x4 pin)
Power Supply: 9V~30V DC input; 1 x Internal power connector (2x2 pin); Support AT/ATX mode
Watchdog Timer: Software programmable support 1~255 sec. system reset
Power Consumption: TBD
Operating Temperature: -20°C ~ 60°C / -40°C ~ 85°C (NANO-AL-ExW2)
Storage Temperature: -40°C ~ 85°C
Operating Humidity: 5%~95%, non-condensing
Vibration: 3G
Dimensions: 115mm x 165mm
Weight: GW:850g/NW:350g