WAFER-BT-E38251-R20

Description

3.5” SBC with Intel® 22nm Atom™/Celeron® on-board SoC, VGA/LVDS/iDP, Dual PCIe GbE, USB 3.0, PCIe Mini, SATA 3Gb/s, mSATA, COM, iRIS-1010, Audio and RoHS

● 3.5” SBC supports Intel® 22nm Atom™ 1.5GHz on-board SoC
● Dual independent display support
● 1333/1066 MHz 1.35V DDR3L SDRAM supported up to 8GB
● COM, USB 3.0, SATA 3Gb/s, PCIe Mini, mSATA and Audio support
● IEI One Key Recovery solution allows you to create rapid OS backup and recovery

Specification

CPU: Intel® Atom™ E3845 on-board SoC (1.91GHz, quad-core, 2MB cache, TDP=10W); Intel® Atom™ E3827 on-board SoC (1.75GHz, dual-core, 1MB cache, TDP=8W); Intel® Atom™ E3826 on-board SoC (1.46GHz, dual-core, 1MB cache, TDP=7W); Intel® Atom™ E3825 on-board SoC (1.33GHz, dual-core, 1MB cache, TDP=6W); Intel® Atom™ E3815 on-board SoC (1.46GHz, single-core, 512KB cache, TDP=5W); Intel® Celeron® J1900 on-board SoC (2GHz, quad-core, 2MB cache, TDP=10W); Intel® Celeron® N2930 on-board SoC (1.83GHz, quad-core, 2MB cache, TDP=7.5W); Intel® Celeron® N2807 on-board SoC (1.58GHz, dual-core, 2MB cache, TDP=4.3W)
BIOS: AMI UEFI BIOS
System Memory: One 204-pin 1066/1333 MHz single-channel DDR3L SO-DIMM supports up to 8GB (J1900, N2930, E3845, E3827, E3826) or 4GB (N2807, E3825, E3815)
Ethernet: LAN1: Intel® I210-AT PCIe controller with NCSI support; LAN2: Intel® I211-AT PCIe controller
I/O Interface: 1 x PS/2 KB/MS; 2 x SATA 3Gb/s with 5V SATA power connector (no RAID); 1 x USB 3.0 (on rear I/O); 5 x USB 2.0 (1 on rear I/O, 4 by pin header); 1 x RS-422/485 (by pin header); 3 x RS-232 (1 on rear I/O, 2 by pin header)
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: Fintek F81866
SMBus: 1 x 4-pin (1x4) wafer
Audio: Realtek ALC662 HD codec; 1 x Analog audio by 10-pin (2x5) header
Display Interfaces: Dual Independent Display; 1 x VGA (Resolution: 2560x1600@60Hz); 1 x 24-bit dual-channel LVDS connector (1920x1200@60Hz); 1 x iDP interface for HDMI, LVDS, VGA, DVI, DP (up to 2560x1600@60Hz)
Expansion: 1 x Full-size PCIe Mini card slot with mSATA support (SATA2 and mSATA share SATA signal)
Watchdog Timer: Software programmable, supports 1~255 sec. system reset
Power Supply: 12V DC input only (AT/ATX support)
Power Consumption: [email protected] (Intel® Celeron® J1900 CPU, 1 x 8GB 1333 MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 7 Engines with 4 execution unit, supports DX11.1, OpenGL 4.2 and OpenCL1.2
Operating Temperature: -20°C ~ 60°C
Storage Temperature: -30°C ~ 70°C
Humidity: 5% ~ 95%, non-condensing
Dimensions: 146mm x 102mm
Weight: GW:600g / NW:250g
Embedded Controller: ITE IT8528E
Front Panel: 1 x 6-pin wafer for power LED & HDD LED; 1 x 2-pin wafer for power button; 1 x 2-pin wafer for power reset
Fan Connector: 1 x 4-pin CPU fan connector; 1 x 4-pin system fan connector
iRIS Remote Management Module: na
LAN LED: 2 x 2-pin (1x2) header