WSB-H610-DVI-R10

Description

Full-size PICMG 1.0 CPU Card Supports 32nm LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® CPU with Intel® H61, DDR3, VGA/DVI-D, Dual Realtek PCIe GbE, USB 2.0, SATA 3Gb/s, COMs, HD Audio and RoHS

● Full-size PICMG 1.0 CPU card with LGA1155 Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor supported
● Two DDR3 & DDR3L 1333/1066MHz DIMM SDRAM supported up to 16GB
● Embedded controller on board supports infrared and PECI 2.0 technologies
● Dual Realtek PCIe GbE and LAN1 with ASF 2.0 support
● TPM V1.2 hardware security function supported by TPM module
● IEI One Key Recovery solution allows you to create raipd OS backup and recovery

Specification

CPU: LGA1155 socket supports Intel® Core™ i7/i5/i3/Pentium®/Celeron® processor
PCH: Intel® H61
BIOS: UEFI
System Memory: Two 240-pin 1333/1066MHz dual-channel DDR3 & DDR3L (1.35V) DIMMs supported (system max. 16GB)
Ethernet: Dual Realtek RTL8111E PCIe GbE controllers (LAN1 with ASF 2.0 support)
I/O Interface: 2 x RS-232
1 x RS-422/485
1 x LPT
1 x FDD
1 x PS/2 KB/MS
1 x 6-pin wafer for KB & MS
7 x USB 2.0 (1 on rear, 6 by pin header)
4 x SATA 3Gb/s (H61 doesn't support AHCI & RAID)
Digital I/O: 8-bit digital I/O (4-bit input, 4-bit output)
Super I/O: Fintek F81866
TPM: 2 x 10-pin header
SMBus: 1 x 4-pin wafer
Audio: Supports 7.1 channel HD audio by IEI AC-KIT-888HD kit
Display Interfaces: 1 x VGA
1 x DVI-D (via header to IO-KIT-001-R20 DVI-D/USB module) (optional)
Expansion: PCI signal and ISA signal via golden finger
Watchdog Timer: Software programmable supports 1~255 sec. system reset
Power Supply: 5V/12V, AT/ATX support
Power Consumption: [email protected], [email protected], [email protected], [email protected]
(3.4GHz Intel® Core™ i7-2600K with two 2GB 1333MHz DDR3 memory)
Graphic: Intel® HD Graphics Gen 6 supports for DX10.1 and OpenGL 3.0
Full MPEG2, VC1, AVC Decode
Operating Temperature: -10°C ~ 60°C
Humidity: 5% ~95%, non-condensing
Dimensions: 338 mm x 122 mm
Weight: GW: 1000g/NW: 260g
Embedded Controller: ITE IT8519E
Front Panel: 1 x Front panel (power LED, HDD LED, speaker, power button, reset button)
I2C: 1 x 4-pin wafer
PCIe-PCI Bridge: ITE IT8892E
PCI-ISA Bridge: ITE IT8888G
Fan Connector: 1 x 4-pin smart Fan Connector
1 x 4-pin system Fan Connector