Deutsch
English
Description
Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D.
IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.
● High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
● Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
● Support X-Roaming < 100 ms
● Support AP/Client/Bridge/AP-Client Mode
● Secured Management by HTTPs
● Wireless connecting status monitoring
● Event Warning by Syslog, Email, SNMP Trap
● 1KV isolation for PoE P.D. port of IAP-420+
● Rigid IP-30 housing design
● DIN-Rail and Wall-mount enabled
Specification
- Physical Ports
- 10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
- 2
- P.O.E. PD port
- Present at ETH2
- Fully compliant with IEEE 802.3af Power Device specifi cation
- Over load & short circuit protection
- Isolation Voltage : 1000 VDC min.
- Isolation Resistance : 108 ohms min
- WLAN interface
- Operating Mode
- AP/Bridge/AP-Client
- Antenna Connector
- 1 x External reverse SMA-type antenna connector
- Radio Frequency Type
- DSSS, OFDM
- Modulation
- IEEE802.11b: CCK, DQPSK, DBPSK
- IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
- Frequency Band
- America/FCC: 2.412~2.462 GHz (11 channels)
- Europe CE/ETSI: 2.412~2.472 Ghz (13 channels)
- Transmission Rate
- 802.11b: 1/2/5.5/11 Mbps
- 802.11g: 6/9/12/18/24/36/48/54 Mbps
- 802.11n(40MHz): UP to 150 Mbps
- Transmit Power
- 802.11b: 13.5dBm ±1.5dBm
- 802.11g: 13.5dBm ±1.5dBm
- 802.11n(2.4G@20MHz): 13.5dBm ±1.5dBm
- 802.11n(2.4G@40MHz): 13.5dBm ±1.5dBm
- Receiver Sensitivity
- 802.11b: -90dBm ±2dBm@1Mbps
- 802.11g: -72dBm ±2dBm@54Mbps
- 802.11n(2.4G@40MHz,MCS7): -68dBm ±2dBm
- Encryption Security
- WEP: (64-bit, 128-bit key supported)
- WPA/WPA2:802.11i (WEP and AES encryption)
- WPA-PSK (256-bit key pre-shared key supported)
- 802.1X Authentication supported
- TKIP encryption
- Wireless Security
- SSID broadcast disable and enable
- Protocol Support
- Protocol
- ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP
- LED Indicators
- Power Indicator
- LED x 3, PWR 1, 2, (PoE):
- Green On: Power is on and functioning Normally.
- 100/1000TX RJ45 Port Indicator
- LED x 2 , Green for port Link/Act at 100Mbps.
- WLAN LEDs
- WLAN Link /ACT: Green: Link,
- Power
- Redundant Input Power
- Dual DC inputs. 12~48VDC on 4-pin terminal block
- Power Consumption (Typ.)
- 4watts
- Overload Current Protection
- Present
- Reverse Polarity Protection
- Present
- Physical Characteristic
- Enclosure
- IP-30
- Dimension (W x D x H)
- 41(W) x 81(D) x 95(H) mm (1.6 x 3.1 x 3.7 inch.)
- Weight (g)
- 297
- Environmental
- Storage Temperature
- -40 to 85°C (-40 to 185°F)
- Operating Temperature
- -10 to 60oC (14 to 140oF)
- Operating Humidity
- 5% to 95% Non-condensing
- Regulatory approvals
- EMI
- FCC Part 15, CISPR (EN55022) class A
- EMS
- EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
- Shock
- IEC60068-2-27
- Free Fall
- IEC60068-2-31
- Vibration
- IEC60068-2-6
- Safety
- EN60950-1
- Warranty
- 3 years
Filter criteria
- Customs Tariff Number
- 85176200
- Status
- Standard
- Manufacturer
- ORING