ASK US

Description

Industrial IEEE 802.11 b/g/n wireless access point with 2x10/100Base-T(X), 1-port PoE P.D.


IAP-420 / IAP-420+ series are reliable 802.11 b/g/n WLAN Access Point with 2 ports LAN. It supports 802.1X and MAC filters for security control. It can be configured to operate in AP/Bridge/Repeater/AP-Client mode. You are able to configure IAP-420 / IAP-420+ series by WEB interface via LAN port or WLAN interface. In addition, IAP-420+ also provides P.D. feature on ETH2 which is fully compliant with IEEE802.3af PoE P.D. specification. Therefore, IAP-420 / IAP-420+ series are one of the best communication solutions for wireless applications on the industrial network.

● High Speed Air Connectivity: WLAN interface support up to 150 Mbps link speed
● Highly Security Capability: WEP/WPA/WPA-PSK(TKIP,AES)/ WPA2/WPA2-PSK(TKIP,AES)/802.1X Authentication supported
● Support X-Roaming < 100 ms
● Support AP/Client/Bridge/AP-Client Mode
● Secured Management by HTTPs
● Wireless connecting status monitoring
● Event Warning by Syslog, Email, SNMP Trap
● 1KV isolation for PoE P.D. port of IAP-420+
● Rigid IP-30 housing design
● DIN-Rail and Wall-mount enabled

Specification

Filter criteria

Customs Tariff Number
85176200
Status
Standard
Manufacturer
ORING

Specification

Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX
2
P.O.E. PD port
Present at ETH2
Fully compliant with IEEE 802.3af  Power Device specifi cation
Over load & short circuit protection
Isolation Voltage : 1000 VDC min.
Isolation Resistance : 108 ohms min
WLAN interface
Operating Mode
AP/Bridge/AP-Client
Antenna Connector
1 x External reverse SMA-type antenna connector
Radio Frequency Type
DSSS, OFDM
Modulation
IEEE802.11b: CCK, DQPSK, DBPSK
IEEE802.11g/n: OFDM with BPSK, QPSK, 16QAM, 64QAM
Frequency Band
America/FCC: 2.412~2.462 GHz (11 channels)
Europe CE/ETSI: 2.412~2.472 Ghz (13 channels)
Transmission Rate
802.11b: 1/2/5.5/11 Mbps
802.11g: 6/9/12/18/24/36/48/54 Mbps
802.11n(40MHz): UP to 150 Mbps
Transmit Power
802.11b: 13.5dBm ±1.5dBm
802.11g: 13.5dBm ±1.5dBm
802.11n([email protected]): 13.5dBm ±1.5dBm
802.11n([email protected]): 13.5dBm ±1.5dBm
Receiver Sensitivity
802.11b: -90dBm ±[email protected]
802.11g: -72dBm ±[email protected]
802.11n([email protected],MCS7): -68dBm ±2dBm
Encryption Security
WEP: (64-bit, 128-bit key supported)
WPA/WPA2:802.11i (WEP and AES encryption)
WPA-PSK (256-bit key pre-shared key supported)
802.1X Authentication supported
TKIP encryption
Wireless Security
SSID broadcast disable and enable
Protocol Support
Protocol
ARP,BOOTP, DHCP, DNS, HTTP, IP, ICMP, SNTP, TCP, UDP, 802.1X, SNMP, STP
LED Indicators
Power Indicator
LED x 3, PWR 1, 2, (PoE):
Green On: Power is on and functioning Normally.
100/1000TX RJ45 Port Indicator
LED x 2 , Green for port Link/Act at 100Mbps.
WLAN LEDs
WLAN Link /ACT: Green: Link,
Power
Redundant Input Power
Dual DC inputs.  12~48VDC on 4-pin terminal block
Power Consumption (Typ.)
4watts
Overload Current Protection
Present
Reverse Polarity Protection
Present
Physical Characteristic
Enclosure
IP-30
Dimension (W x D x H)
41(W) x 81(D) x 95(H) mm (1.6 x 3.1 x 3.7 inch.)
Weight (g)
297
Environmental
Storage Temperature
-40 to 85°C (-40 to 185°F)
Operating Temperature
-10 to 60oC (14 to 140oF)
Operating Humidity
5% to 95% Non-condensing
Regulatory approvals
EMI
FCC Part 15, CISPR (EN55022) class A
EMS
EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS),EN61000-4-8, EN61000-4-11
Shock
IEC60068-2-27
Free Fall
IEC60068-2-31
Vibration
IEC60068-2-6
Safety
EN60950-1
Warranty
3 years

Alternatives

Click here to opt-out of Google Analytics.