M-7050-G-CR

Description

Modbus RTU Module / DC / 7 DIO / isol.

The M-7050 offers 7 channels for digital input and 8 channels for digital output, each of which are non-isolated. The M-7050 supports sink-type output using an NPN open collector and source-type input. All input channels are able to be used as 16-bit counters. There are options to enable both poweron and safe values. The M-7050D has 15 LED indicators for channel status monitoring. The hardware specifications for the M-7050 are the same as the I-7050 and both support the Modbus RTU and DCON protocols which can be configured via software.

● 8 Digital Outputs and 7 Digital Inputs
● Open Collector Output
● Non-isolated for all Channels
● Digital Input Channels Can Be Used As 16-bit Counters
● Configurable Power-on Value Settings
● Configurable Safe Value Settings
● Cost-effective
● Dual Watchdog
● Wide Operating Temperature Range: -25 ~ +75°C

Specification

System: M-7050-G-CR
Built-in Watchdog Timer: Yes
Interface: M-7050-G-CR
Bus: RS-485
Protocol: DCON - Modbus RTU
Max. Baud Rate: 115200 bps
Display: -
Digital Input: M-7050-G-CR
Digital Input: 7
Signal Type: Source, non-isolated channel with common ground
On Voltage Level: +4 to +30V
Off Voltage Level: +1V max.
Counter: Channels: 7, Max. Counts: 16-bit, Max. Input Frequency: 100Hz, Min. Pulse Width: 5ms
Isolation Voltage: -
Digital Output: M-7050-G-CR
Digital Outputs: 8, Sink, NPN
Current: 30mA max.
Voltage: 30V max.
Installation: M-7050-G-CR
Power Consumption: -
Dimensions (WxLxH): 72 mm x 123 mm x 35 mm
Voltage Supply: 10-30 VDC
Operating Temperature: -25 to 75°C
Mounting: Din Rail or Wall Mounting
Color: Grey