ICS-4040

Description

Industrial 4-port lite-managed PCI Ethernet switch card with 4x10/100Base-T(X)

ICS-4040 is a lite-managed redundant ring Ethernet switch card with PCI-Bus and 4x10/100Base-T(X) ports. ICS-4040 could be installed on any IPC motherboard with PCI socket to make the IPC/embedded system able to communicate the other devices redundantly. Meanwhile, the network could feature Ethernet network redundancy by the fastest redundant ring protocol, O-Ring (recovery time < 10 ms over 250 units of connections ) and the standard redundant protocols, RSTP/STP (IEEE 802.1w/D). Accordingly, the mission-critical communications could be protected from network any interruptions or malfunctions. Further, ICS-4040 features an external redundant DC power input. Hence, even if the IPC motherboard fails, the data transmission could bypass the failed IPC motherboard and the network will still work properly. Therefore, ICS-4040 is the best solution to IPC/embedded systems to feature Ethernet network redundancy.

• Fastest Redundant Ethernet Ring : O-Ring (recovery time < 10ms over 250 units of connection)
• Open-Ring support the other vendor's ring technology in open architecture
• Supports 4x10/100Base-T(X) ports
• Multiple Redundant Ethernet technology RSTP/STP, supported to protect your industrial network
• SNMP v1/v2/v3 support for secure network management
• Configurable by Web-based and Windows utility (Open-Vision)
• Event notification through Syslog, Email, and SNMP trap
• Complied with PCI Bus specification, Rev 2.2

Specification

Physical Ports
10/100Base-T(X) Ports in RJ45 Auto MDI/MDIX: 4
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-TX and 100Base-FX; IEEE 802.3x for Flow control; IEEE 802.1D for STP (Spanning Tree Protocol) IEEE 802.1p for COS (Class of Service); IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol); IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
MAC Table: 2048 MAC addresses
Switch Properties: Switching bandwidth : 1.0Gbps; VLAN : Port Based
Security Features: Enable/disable ports; VLAN to segregate and secure network traffic; SNMPv3 encrypted authentication and access security
Software Features: STP/RSTP (IEEE 802.1D/w); Redundant Ring (O-Ring) with recovery time less than 10ms over 250 units; Port configuration, status, statistics, monitoring, security; DHCP Client
Network Redundancy: O-Ring; Open-Ring; Fast recovery; STP; RSTP
Processing: Store-and-Forward
LED Indicators
Power Indicator: Green : Power LED x 1
Fault Indicator: Red : Indicates unexpected event occurred
10/100Base-T(X) RJ45 Port Indicator: Green for port Link/Act. Amber for O-Ring port indicator
Fault contact
Relay: Relay output to carry capacity of 1A at 24VDC (Optional)
Power
Redundant Input Power: PCI bus-powered and external 9~30 VDC on 2-pin terminal block
Power Consumption (Typ.): 3.5 Watts
Overload Current Protection: Present
Reverse Polarity Protection: Present on terminal block
Physical Characteristics
Dimensions (W x D x H): 121(H) x 100(W) mm (4.76x3.94 inch.)
Weight (g): 100 g
Environmental
Operating Temperature: -10 to 60°C (14 to 140°F)
Operating Humidity: 5% to 95% Non-condensing
Regulatory Approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Warranty: 5 years