RMC-111PB

Beschreibung

Industrial Rack mount card type Ethernet to fiber media converter with 1x10/100Base-T(X) and 1x100Base-FX, SFP socket

RMC-111 series is industrial rack mount card type Ethernet to fiber media converter for rack-mounted chassis box of RMC-1000, that supports hot-swappable and easy installation to RMC-1000. RMC-111 series is a cost-effective solution for the conversion between 10/100Base-T(X) and 100Base-FX interface, it allows you to extend communication distance by optical fiber. RMC-111 series supports MDI/MDIX auto detection, so you don’t need to use crossover wires.
RMC-111 series also support the LFP (Link Fault Pass-through) feature. When one side of the link fails, the other side continues transmitting packets, and waiting for a response that never arrives from the disconnected side. Use the DIP-Switch to enable the LFP function, then RMC-111 series will force the link to shutdown as soon as noticed that the other link has failed, giving the application software a sign to react to the situation. Therefore, the RMC-111 series to collocate RMC-1000 is reliable media converter and can satisfy most demand of operating environment.

• Supports 1 port 10/100Base-T(X) auto-negotiation and auto-MDI/MDI-X
• Support Ethernet to fiber or Ethernet to SFP port
• Support LFP (Link Fault Pass-through) function
• Supports full/half duplex operation
• Supports store and forward transmission
• Provided DIP-Switch to setting function
• Hot-swappable, High reliability and easy installation
• Up to 18 slot high density installation in RMC-1000 chassis on 19 inches rack

Spezifikation

Physical Ports
10/100Base0T(X) port in RJ45 Auto MDI/MDIX: 1
100Base-FX SFP port: 1
Technology
Ethernet Standards: IEEE 802.3 for 10Base-T; IEEE 802.3u for 100Base-T(X) and 100Base-FX; IEEE 802.3x for Flow control
Processing: Store-and-Forward
DIP-Switch setting: DIP-Switch 1 for LFP mode selection : (ON) enable / (OFF) disable; DIP-Switch 2 for Ethernet speed selection : (ON)10Mbps / (OFF) 10/100Mbps Auto-negotiate; DIP-Switch 3 for Ethernet full/half duplex selection : (ON) Half-duplex / (OFF) Full/Half-Duplex Auto-negotiate; DIP-Switch 4 for fiber full/half duplex selection : (ON) Half-Duplex / (OFF) Full-Duplex
LED Indicators
Power indicator: Green : Power LED x 1 (ON : power input on-line / (OFF) power input off-line
10/100Base-T(X) RJ45 port indicator: Green for port Link/Act – (ON) Link up / (Blinking) Acting / (OFF) Link down; Amber for 100Mbps/10Mbps indicator – (ON) Working at 100Mbps / (OFF) Working at 10Mbps; Green for port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
100Base-FX fiber port indicator: Green for fiber port Link/Act - (ON) Link up / (Flash) Acting / (OFF) Link down; Green for fiber port duplex indicator – (ON) Full-Duplex / (OFF) Half-Duplex
LFP statue indicator: Amber LED – (ON) LFP function fail / (OFF) LFP function disablem
Power
Power consumption (Typ.): 2.2 Watts
Overload current protection: Present
Physical Characteristic
Dimension (W x D x H): 21.8 (W) x 73.1 (D) x 126 (H) mm
Weight (g): 140 g
Environmental
Storage Temperature: -40 to 85°C (-40 to 185°F)
Operating Temperature: -10 to 60°C (14 to 140°F)
Operating Humidity: 5% to 95% Non-condensing
Regulatory approvals
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), EN61000-4-3 (RS), EN61000-4-4 (EFT), EN61000-4-5 (Surge), EN61000-4-6 (CS), EN61000-4-8, EN61000-4-11
Shock: IEC60068-2-27
Free Fall: IEC60068-2-32
Vibration: IEC60068-2-6
Warranty: 5 years